{"title":"Receiver Packs","description":"","products":[{"product_id":"protek-rc-2s-male-xh-balance-connector-w-15cm-22awg-wire","title":"ProTek RC 2S LiPo 20C Battery (7.4V\/2100mAh) (Receiver Battery)","description":"\u003cp\u003eProTek RC 2S LiPo 20C Battery (7.4V\/2100mAh) (Receiver Battery)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790512906403,"sku":"PTK-5177","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ptk-5177.jpg?v=1614971054"},{"product_id":"protek-rc-hv-lipo-receiver-battery-pack-mugen-ae-8ight-x-7-6v-2200mah","title":"ProTek RC HV LiPo Receiver Battery Pack (HB\/TLR 8IGHT) (7.6V\/2350mAh)","description":"\u003cp\u003eProTek RC HV LiPo Receiver Battery Pack (HB\/TLR 8IGHT) (7.6V\/2350mAh)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790611341475,"sku":"PTK-5500","price":54.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ptk-5500.jpg?v=1614971677"},{"product_id":"protek-rc-lightweight-steel-48p-pinion-gear-3-17mm-bore-12t","title":"ProTek RC Lightweight LiPo Receiver Battery Pack (Mugen\/AE\/XRAY\/8ight-X) (7.4V\/1600mAh) (w\/Balance Plug)","description":"\u003cp\u003eThe ProTek R\/C Lightweight LiPo Receiver Battery Pack was developed specifically for Mugen, AE and XRAY 1\/8 off road receiver battery boxes! But, this super light weight Li-Poly battery is a great choice to power the electronics of 1\/10th \u0026amp; 1\/8th scale nitro powered race cars of all types. This battery weighs just 60 grams, and is a great option for racers who are looking to shed weight and save space in their battery box, while having plenty of capacity for long main events. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThere are many advantages to using a Li-Poly receiver battery, but the biggest advantage is that the battery voltage to your receiver and servos will remain constant throughout the race with the use of a voltage regulator, or high voltage compatible servos. A constant voltage level to your servos will ensure consistent performance at the start and end of your race compared to typical NiMH receiver battery packs. Additionally, the overall weight of your race car will be significantly reduced over the use of typical NiMh receiver packs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreat battery for the Airtronics M11X\/M12 radio!\u003c\/strong\u003e\u003cbr\u003eThis battery is also a great choice for the Airtronics M11X and M12 transmitters, which require a 2S Li-Poly battery for operation.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/images.amain.com\/images\/manuals\/Li-Poly%20Battery%20Manual.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"View Manual Icon small\" src=\"https:\/\/images.amain.com\/images\/manuals\/ViewManual_Icon_small.png\"\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/images.amain.com\/images\/manuals\/ProTek%20RC%20Warranty.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"Warranty Info Icon small\" src=\"https:\/\/images.amain.com\/images\/manuals\/WarrantyInfo_Icon_small.png\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e\u003cspan\u003e 1600 mAh\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 58 grams (including wire and connector)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eLi-Po cell arrangement:\u003c\/strong\u003e\u003cspan\u003e 2S2P\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eNominal voltage:\u003c\/strong\u003e\u003cspan\u003e 7.4 Volts\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDimension:\u003c\/strong\u003e\u003cspan\u003e 84 x 25.2 x 13mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eConnector:\u003c\/strong\u003e\u003cspan\u003e JR Style with thick 20AWG Silicone Wire\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eBalancer Plug:\u003c\/strong\u003e\u003cspan\u003e XH style (Align, E-Flite compatible)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRecommended Application:\u003c\/strong\u003e\u003cspan\u003e 1\/10th \u0026amp; 1\/8th scale vehicles that normally use a flat stick pack receiver battery\u003c\/span\u003e\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cbr\u003e\u003c\/strong\u003e1)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eleave the battery in your model when charging\u003cbr\u003e2)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eleave unattended when charging\u003cbr\u003e3)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebalance charge the battery\u003cbr\u003e4)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003euse a LiPo charging bag\u003cbr\u003e5)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYOU MUST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)\u003cbr\u003e6)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYOU MUST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003enot over discharge the Li-Poly battery pack\u003cbr\u003e7)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eREAD \u0026amp; UNDERSTAND\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe instructions carefully before operating this battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and\/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.\u003cbr\u003e\u003cbr\u003eDo not expose batteries to sunshine or store\/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790616912035,"sku":"PTK-5198","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ptk-5198.jpg?v=1614971702"},{"product_id":"protek-rc-lipo-kyosho-tekno-hump-receiver-battery-pack-7-4v-2600mah","title":"ProTek RC LiPo HB \u0026 Losi 8IGHT Receiver Battery Pack (7.4V\/2000mAh)","description":"\u003cp\u003eProTek RC LiPo HB \u0026amp; Losi 8IGHT Receiver Battery Pack (7.4V\/2000mAh)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790624153763,"sku":"PTK-5171","price":57.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ptk-5171.jpg?v=1614971746"},{"product_id":"protek-rc-lipo-receiver-battery-pack-7-4v-2300mah-mugen-ae-8ight-x","title":"ProTek RC LiPo Kyosho \u0026 Tekno Receiver Battery Pack (7.4V\/2600mAh)","description":"\u003cp\u003eProTek RC LiPo Kyosho \u0026amp; Tekno Receiver Battery Pack (7.4V\/2600mAh)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790624252067,"sku":"PTK-5161","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ptk-5161.jpg?v=1614971748"},{"product_id":"reedy-2s-hard-case-lipo-battery-pack-65c-w-4mm-bullets-7-4v-5000mah","title":"Reedy 2S Flat LiPo Receiver Battery Pack (7.4V\/2400mAh)","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe Reedy 2S Flat LiPo Receiver Battery Pack features 2400mAh capacity and durable construction, making it well suited for use as receiver batteries in nitro-powered vehicles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eA standard power plug fits directly into your receiver\/switch harness while a XH balance connector allows for simple balance charging.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCapacity:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 2400mAh\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVoltage:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 7.4V LiPo (2S)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDimensions:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 84.5x29.8x16.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMax. Charge Current:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e2.4A\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWeight:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 84g\u003c\/span\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790757847203,"sku":"ASC27313","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/asc27313.jpg?v=1614972456"},{"product_id":"reedy-lipo-battery-brass-weight-plate-set-1x-22g-1x-36g","title":"Reedy LiFe Receiver Battery Pack (6.6V\/1900mAh)","description":"\u003cp\u003eReedy LiFe Receiver Battery Pack (6.6V\/1900mAh)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790769053859,"sku":"ASC27316","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/asc27316_75b0c3d3-70db-4e88-a2a5-0d1cfac3aa94.jpg?v=1764954255"},{"product_id":"ecopower-640t-13g-waterproof-metal-gear-digital-sub-micro-servo-trx-4","title":"EcoPower 5-Cell NiMH Stick Receiver Battery Pack (6.0V\/1600mAh)","description":"\u003cp\u003eEcoPower 5-Cell NiMH Stick Receiver Battery Pack (6.0V\/1600mAh)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39305886924963,"sku":"ECP-5009","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ecp-5009.jpg?v=1614908145"},{"product_id":"7-4v-600mah-2s-20c-lipo-battery-ec3","title":"Dynamite 7.4V 3200mAh 2S Reaction Li-Ion Receiver Battery: Universal Receiver","description":"7.4V 3200mAh 2S Reaction Li-Ion Receiver Battery: Universal Receiver","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":39376192766115,"sku":"DYNB0510","price":44.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/DYNB0510_A0_IGHQ8PNE.jpg?v=1615232630"},{"product_id":"6-0v-1600mah-nimh-2-3a-flat-receiver-battery-universal-receiver","title":"Onyx 6.0V 1600mAh 2\/3A NiMH Hump Receiver Battery: Universal Receiver","description":"6.0V 1600mAh 2\/3A NiMH Hump Receiver Battery: Universal Receiver","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":39384836505763,"sku":"ONXM2169","price":34.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ONXM2169_A0_TJ1HMBG1.jpg?v=1615304233"},{"product_id":"gens-ace-rx-2500mah-2s2p-7-4v-lipo-jr-3p-plug-soft-case","title":"Gens Ace RX 2500mAh 2S2P 7.4V LiPo JR-3P Plug Soft Case","description":"Gens Ace RX 2500mAh 2S2P 7.4V LiPo JR-3P Plug Soft Case","brand":"Amain","offers":[{"title":"Default Title","offer_id":41886071816355,"sku":"GEA25002SRXJR","price":39.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/Gens-Ace-367-RX-2500mAh-2S2P-7.4V-LiPo-JR-3P-Plug-Soft-Case.jpg?v=1637002205"},{"product_id":"gens-ace-2400mah-2s1p-7-4v-receiver-lipo-jst-plug-soft-case","title":"Gens Ace 2400mAh 2S1P 7.4V Receiver LiPo JST Plug Soft Case","description":"Gens Ace 2400mAh 2S1P 7.4V Receiver LiPo JST Plug Soft Case","brand":"Hi-Performance","offers":[{"title":"Default Title","offer_id":43153130619043,"sku":"GEA2S2400RXJS","price":42.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/gea2s2400rxjs.jpg?v=1671900281"},{"product_id":"protek-rc-hv-lipo-hump-short-receiver-battery-pack-kyosho-tekno-7-6v-2600mah-w-balancer-plug","title":"ProTek RC HV LiPo Hump\/Short Receiver Battery Pack (Kyosho\/Tekno) (7.6V\/2600mAh) (w\/Balancer Plug)","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe Protek R\/C 2600mAh HV LiPo Receiver Battery Pack brings LiHV power to your servos! This battery is a direct fit in Kyosho and Tekno 1\/8 scale battery boxes, and will provide improved power and response from your HV servos. \u003c\/span\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThese packs are built with a lexan plastic shell around the outside of the battery, and then covered in blue heat shrink. The lexan shell is designed to protect the battery cells while in the vehicle, for longer life. Note that due to the lexan shell, sometimes the battery may feel soft to the touch on the outside of the battery; this is normal as there is a small air gap between the lexan shell and the battery cells inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 2600 mAh\u003c\/li\u003e\n\u003cli\u003eCase: Lexan shell covered with heat shrink\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 100 grams (including wire and connector)\u003c\/li\u003e\n\u003cli\u003eLi-Po cell arrangement: 2S2P\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 7.6 Volts\u003c\/li\u003e\n\u003cli\u003eDischarge capability: 8C continuous (20.8A)\u003c\/li\u003e\n\u003cli\u003eDimension (LxWxH): 54x31x31mm\u003c\/li\u003e\n\u003cli\u003eConnector: JR Style with thick 20AWG Silicone Wire\u003c\/li\u003e\n\u003cli\u003eBalancer Plug: XH style (Align, E-Flite compatible)\u003c\/li\u003e\n\u003cli\u003eRecommended Application: Kyosho and Tekno vehicles, 1\/10th \u0026amp; 1\/8th scale nitro models, Helicopters and Airplanes \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cbr\u003e\u003c\/strong\u003e1)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eleave the battery in your model when charging\u003cbr\u003e2)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eleave unattended when charging\u003cbr\u003e3)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebalance charge the battery\u003cbr\u003e4)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003euse a LiPo charging bag\u003cbr\u003e5)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYOU MUST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)\u003cbr\u003e6)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYOU MUST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003enot over discharge the Li-Poly battery pack\u003cbr\u003e7)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eREAD \u0026amp; UNDERSTAND\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe instructions carefully before operating this battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and\/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.\u003cbr\u003e\u003cbr\u003eDo not expose batteries to sunshine or store\/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":43437395312803,"sku":"PTK-5502","price":74.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/ptk-5502.jpg?v=1686841176"},{"product_id":"gens-ace-2s-lipo-receiver-battery-7-4v-2500mah-w-jr-connector","title":"Gens Ace 2S LiPo Receiver Battery (7.4V\/2500mAh) w\/JR Connector","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eGens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eVoltage:\u003c\/strong\u003e\u003cspan\u003e 7.4V\u003c\/span\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eCell Count:\u003c\/strong\u003e\u003cspan\u003e 2S2P\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e\u003cspan\u003e 2500mAh\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e 57x30x30.3mm (LxWxH)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 91g\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePlugs:\u003c\/strong\u003e\u003cspan\u003e JR\u003c\/span\u003e\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":43744341786787,"sku":"GEA2S2500RXJR","price":44.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/gea2s2500rxjr.jpg?v=1700066250"},{"product_id":"protek-rc-hv-lipo-receiver-battery-pack-mugen-ae-8ight-x","title":"ProTek RC HV LiPo Receiver Battery Pack (Mugen\/AE\/8ight-X)","description":"\u003cp class=\"productname\"\u003e\u003cspan\u003eProTek RC HV LiPo Receiver Battery Pack (Mugen\/AE\/8ight-X) (7.6V\/2200mAh) (w\/Balance Plug)\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eProTek RC High Voltage Surface\/Air Receiver Battery\u003c\/h2\u003e\n\u003cp\u003eThe ProTek R\/C 2200mAh HV LiPo Receiver Battery Pack brings LiHV power to your servos! This battery is a direct fit in Mugen and Team Associated 1\/8 scale battery boxes, and will provide improved power and response from your HV servos.\u003c\/p\u003e\n\u003cp\u003eThese packs are built with a Lexan plastic shell around the outside of the battery, and then covered in blue heat shrink. The Lexan shell is designed to protect the battery cells while in the vehicle, for longer life. Note that due to the Lexan shell, sometimes the battery may feel soft to the touch on the outside of the battery; this is normal as there is a small air gap between the Lexan shell and the battery cells inside.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"product-page-features\"\u003e\n\u003cli\u003eDirect fit for 1\/8 Losi 8IGHT and 1\/8 HB battery boxes\u003c\/li\u003e\n\u003cli\u003eWorks great Helicopters and Airplanes as well!\u003c\/li\u003e\n\u003cli\u003eBuilt in Lexan shell for added protection\u003c\/li\u003e\n\u003cli\u003eGreat for HV servos!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIMPORTANT LITHIUM POLYMER SAFETY INFORMATION\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT leave a battery in your model when charging\u003c\/li\u003e\n\u003cli\u003eDO NOT leave lithium batteries unattended when charging\u003c\/li\u003e\n\u003cli\u003eALWAYS balance charge lithium battery\u003c\/li\u003e\n\u003cli\u003eALWAYS use a LiPo Safe charging bag\/box\u003c\/li\u003e\n\u003cli\u003eYOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!)\u003c\/li\u003e\n\u003cli\u003eYOU MUST not over discharge lithium battery packs\u003c\/li\u003e\n\u003cli\u003eREAD \u0026amp; UNDERSTAND the instructions carefully before operating this battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"productname\"\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and\/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store\/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":45099882348707,"sku":"PTK-5501","price":74.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/ptk-5501_1.jpg?v=1723730898"},{"product_id":"ecopower-5-cell-nimh-hump-receiver-pack-w-rx-connector-6-0v-1500mah","title":"EcoPower 5-Cell NiMH Hump Receiver Pack w\/Rx Connector (6.0V\/1500mAh)","description":"\u003cp\u003e\u003cspan\u003eThis is an EcoPower 5-Cell, 6.0V, 1500mAh NiMH Hump style Receiver Pack. This receiver pack is built using quality 2\/3A size 1500mAh NiMH cells and features a JR style connector. This pack will fit into most 1\/8th scale vehicles that use a hump style receiver pack. The recommended charge rate for these batteries is 1A for the best battery life and run time, and we do not recommend you charge them at more than 1C (1.5A Max).\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable class=\"specstable\" cellspacing=\"0\" cellpadding=\"0\" border=\"1px solid gray\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003e\u003cstrong\u003eBattery Model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eECP-5001\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e114g\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003e\u003cstrong\u003eType\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNiMH\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1500mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.0V nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnector Type\u003cbr\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003e3x2 Hump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Cells\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 Cell\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"odd\"\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (WxLxH)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e31.35x53x31.7mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Charge Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1C (1.5A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended guidelines for handling 2\/3A NiMH batteries:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCharge the battery with a quality charger, at a maximum current of 1.5A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eCharger cut-off setting: Peak voltage = 5mV per cell, Temperature \u0026lt;55ºC, and best with timer. [Example on Peak voltage calculation: 6-cell pack = 5mV x 6 = 0.03V]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe battery can offer high current discharge, and are rated to a level of 5~10A (plug dependent).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eIf you expect to leave the battery idle for \u0026gt;2 weeks, charge it for 1\/3 capacity (say, 1A for 15 minutes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAvoid storing the battery in hot or humid environment. Best temperature would be around 20~25ºC.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":45410345713827,"sku":"ECP-5001","price":53.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/ecp-5001_1.jpg?v=1732212926"},{"product_id":"protek-rc-lipo-receiver-battery-pack-mugen-ae-8ight-x-7-4v-2300mah-w-balance-plug","title":"ProTek RC LiPo Receiver Battery Pack (Mugen\/AE\/8ight-X) (7.4V\/2300mAh) (w\/Balance Plug)","description":"\u003cp\u003eThis is a Li-Poly 2300mAh receiver battery pack from ProTek R\/C, made with super thick 20awg silicone wire! This super light weight Li-Poly battery is designed to power the electronics of 1\/10th \u0026amp; 1\/8th scale nitro powered race cars. There are many advantages to using a Li-Poly receiver battery, but the biggest advantage is that the battery voltage to your receiver and servos will remain constant throughout the race with the use of a voltage regulator (required). A constant voltage level to your servos will ensure consistent performance at the start and end of your race compared to typical NiMH receiver battery packs. Additionally, the overall weight of your race car will be significantly reduced over the use of typical NiMh receiver packs.\u003cbr\u003e\u003cbr\u003eThese packs are built with a lexan plastic shell around the outside of the battery, and then covered in blue heat shrink. The lexan shell is designed to protect the battery cells while in the vehicle, for longer life. Note that due to the lexan shell, sometimes the battery may feel soft to the touch on the outside of the battery; this is normal as there is a small air gap between the lexan shell and the battery cells inside.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerfect battery for the Airtronics M11X\/M12 radio!\u003c\/strong\u003e\u003cbr\u003eThis battery is also the perfect transmitter battery for the Airtronics M11X and M12 transmitters, which require a 2S Li-Poly battery for operation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRuntime:\u003c\/strong\u003e\u003cbr\u003eDon’t be thrown off by the capacity rating of Li-Poly battery packs, as you will get awesome runtime out this pack! Unlike NiMH battery packs, Li-Poly battery packs do not lose voltage as quickly over time and can handle higher current draw than typical NiMH battery packs. Given that Li-Poly battery packs provide a higher nominal voltage (7.4V nominal), the actual capacity of the battery pack when compared to a typical NiMH battery pack (6.0V nominal) is about 30% more than the rated value (so this pack would be about the same as a 3000mAh NiMH pack in total capacity). Also with the use of a voltage regulator, Li-Poly battery packs will produce the same voltage to your receiver and servos at the end of the pack as it does at the start. This means the useable capacity of the battery pack is significantly more than typical NiMH battery packs, because most NiMH battery packs will produce significantly less than the 6.0V nominal voltage once they get below half capacity (ie: your servos will be a lot more sluggish if your typical NiMH battery pack is below half capacity).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 2300 mAh\u003c\/li\u003e\n\u003cli\u003eWeight: 87 grams (including wire and connector)\u003c\/li\u003e\n\u003cli\u003eLi-Po cell arrangement: 2S1P\u003c\/li\u003e\n\u003cli\u003eNominal voltage: 7.4 Volts\u003c\/li\u003e\n\u003cli\u003eDischarge capability: 8C continuous (18.4A), 16C max (36.8A)\u003c\/li\u003e\n\u003cli\u003eDimension(mm): 85 x 30 x 17mm\u003c\/li\u003e\n\u003cli\u003eConnector: JR Style with thick 20AWG Silicone Wire\u003c\/li\u003e\n\u003cli\u003eBalancer Plug: ProTek R\/C XH style (Align, E-Flite compatible)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended Application: 1\/10th \u0026amp; 1\/8th scale vehicles that normally use a flat stick pack receiver battery, Helicopters and Airplanes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT:\u003cbr\u003e\u003c\/strong\u003e1)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eleave the battery in your model when charging\u003cbr\u003e2)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDO NOT\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eleave unattended when charging\u003cbr\u003e3)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebalance charge the battery\u003cbr\u003e4)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eALWAYS\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003euse a LiPo charging bag\u003cbr\u003e5)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYOU MUST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003euse a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)\u003cbr\u003e6)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eYOU MUST\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003enot over discharge the Li-Poly battery pack\u003cbr\u003e7)\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eREAD \u0026amp; UNDERSTAND\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe instructions carefully before operating this battery\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and\/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.\u003cbr\u003e\u003cbr\u003eDo not expose batteries to sunshine or store\/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":45600102744227,"sku":"PTK-5196","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/ptk-5196_1.jpg?v=1739202207"}],"url":"https:\/\/www.xtremerc.ca\/collections\/receiver-packs.oembed","provider":"Xtreme RC \u0026 Raceways","version":"1.0","type":"link"}