{"title":"BRUSHLESS MOTORS","description":"","products":[{"product_id":"maclan-mrr-12-30mm-25-5t-rpm-rotor-blue","title":"Maclan MR8.3 1\/8th Scale Buggy Competition Brushless Motor (2100Kv)","description":"\u003cdiv\u003e\n\u003cp\u003eThe Maclan MR8.3 1\/8th Scale Buggy Competition Brushless Motor is by far the best motor to pair with the Maclan Racing MMax 8 ESC. The MR8.3 has evolved with all Maclan has learned from their predecessors.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eShorter length, lower weight, and most importantly, the smoother power!\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e4.5 mm shorter in length\u003c\/li\u003e\n\u003cli\u003eup to 25g lighter in weight\u003c\/li\u003e\n\u003cli\u003eRedesigned stator and rotor which results in smoother power delivery and less power consumption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eDual sensor ports with more robust end cap structure\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe additional sensor port allows for the flexibility to install the sensor cable vertically or horizontally for easier wiring. The redesigned end cap structure reduces the chance of damage from impacts.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eShorter (4.5mm) length and stronger end cap structure design\u003c\/li\u003e\n\u003cli\u003eRedesigned stator and rotor design for smoother power delivery\u003c\/li\u003e\n\u003cli\u003eDual sensor ports for easier wiring\u003c\/li\u003e\n\u003cli\u003eError free sensor unit design\u003c\/li\u003e\n\u003cli\u003eStaggered 4-pole-8-magnet with dual side balanced rotor design\u003c\/li\u003e\n\u003cli\u003eHeavy duty solder tabs\u003c\/li\u003e\n\u003cli\u003eOver sized precision dual ball bearings\u003c\/li\u003e\n\u003cli\u003eCompletely rebuildable design with all parts readily available from Maclan Racing\u003c\/li\u003e\n\u003cli\u003eROAR approval pending \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eKV Rating:\u003c\/strong\u003e 2100KV\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCase Length:\u003c\/strong\u003e 66.5mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCase Diameter:\u003c\/strong\u003e 42mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eShaft Extension:\u003c\/strong\u003e 17mm\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eShaft Diameter: 5mm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 330g\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePoles: \u003c\/strong\u003e4-pole\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMax Li-Po Cell:\u003c\/strong\u003e 4S\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790017192099,"sku":"MCL1049","price":229.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/mcl1049.jpg?v=1614967767"},{"product_id":"maclan-mrr-v2m-competition-sensored-modified-brushless-motor-6-5t","title":"Maclan MRR V2m Competition Sensored Modified Brushless Motor (5.5T)","description":"\u003cp\u003e\u003cspan\u003eThe Maclan MRR V2m Competition Sensored Modified Brushless Motor features a completely redesigned stator and windings, updated end cap, and 12.20mm ultra smooth rotor. The V2m provides much smoother low to mid-range power band. It also reduces weight by an average of 12% over its predecessor.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUpdated End Cap\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe V2m series have updated end cap to improve the durability of the sensor connector housing. It ensures the sensor connector does not get damaged easily by impact.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e12.20mm Ultra Smooth Rotor\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe V2m equips with the 12.20mm ultra smooth rotor. It provides much smoother low to mid-range power band. Optional 12.50mm rotors for high torque and ultra-high torque are also available for different track conditions and sizes.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Rotor: MCL4174  12.20mm Ultra Smooth Rotor (Red)\u003c\/li\u003e\n\u003cli\u003eOptional Rotor: MCL4175 12.50mm High Torque Rotor (Red), MCL4187 12.50mm Ultra High Torque Rotor (Black)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5.5 Turn Variant\u003c\/li\u003e\n\u003cli\u003eEngineered \u0026amp; Developed right here in the U.S.A.\u003c\/li\u003e\n\u003cli\u003e100% Hand Built\u003c\/li\u003e\n\u003cli\u003ePremium Stator Material (Made in Japan)\u003c\/li\u003e\n\u003cli\u003eRedesigned stator\u003c\/li\u003e\n\u003cli\u003eRedesigned case structure\u003c\/li\u003e\n\u003cli\u003eRedesigned sensor unit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAverage 12% lighter than previous MRR series motors\u003c\/li\u003e\n\u003cli\u003e12.2mm Ultra Smooth Rotor as standard equipment\u003c\/li\u003e\n\u003cli\u003eAvailable in 3.5\/4.5\/5.0\/5.5\/6.0\/6.5\/7.0\/7.5\/8.5\/9.5\/10.5\u003c\/li\u003e\n\u003cli\u003eROAR approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShort Stack:\u003c\/strong\u003e\u003cspan\u003e No\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCase Length:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e2.02in\/51.50mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCase Diameter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e1.42in\/36mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShaft Extension:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e0.552in\/14mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShaft Size:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e3.17mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e152~159g\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003ePoles:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e2 Poles\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDefault Rotor:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e3.5T to 9.5T default with MCL4174, 10.5T defaults with MCL4143\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790019125411,"sku":"MCL1040","price":139.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/mcl1040.jpg?v=1614967811"},{"product_id":"maclan-mrr-v3-competition-sensored-brushless-motor-17-5t","title":"Maclan MRR V3 Competition Sensored Brushless Motor (13.5T)","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Maclan MRR V3 Competition Sensored Brushless Motor is the result of the latest efforts by Maclan Racing and is based on the successful V2 platform with various updates to improve overall performance. Improvements in this generation are significant and will make a noticeable performance gain.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE:\u003c\/strong\u003e This motor should not be paired with the Reedy Blackbox 510R 2S ESC (ASC27004, ASC27005). These ESCs deliver 3.3V from the sensor port, and Maclan V3 motors require a minimum of 4.8V.   \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngineered \u0026amp; Developed right here in the U.S.A.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpdated 1-piece precision machined motor can design that eliminates the need for long motor can screws. Redesign uses a total of 5 short screws. It saves weight and no more optional screws required.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved stator shape that meets the latest ROAR regulations for the highest legal performance.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRealigned sensor positions for more accurate reading.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePremium Ultra High Torque Rotor is now standard by default. You get best performance right out of the box. Available in 13.5, 17.5, 21.5 Turns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eAvailable Turns:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e13.5\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShort Stack:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eYes\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCase Length:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e51.20mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCase Diameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e36.00mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft Extension:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e14.00mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft Size:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e3.17mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWeight:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e147g±2g\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScrews Size (end cap):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eM2.5x6 (1.5mm Hex)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScrew Size (motor can):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eM2x6 (0.05\" Hex)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFront Bearing Size: ID:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e3.175mm OD: 9.525mm H: 3.9675mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRear Bearing Size: ID:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e3.175mm OD: 7.9375mm H: 3.5712mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePoles:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e2-Pole\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDefault 13.5\/17.5\/21.5 Rotor:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ePremium Ultra High Torque Rotor\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eROAR Approved:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17.5 Approved \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e13.5\/21.5 pending approval\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLimited Factory Warranty:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e120-Day\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790019616931,"sku":"MCL1050","price":149.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/mcl1050.jpg?v=1614967819"},{"product_id":"maclan-mrr-v3-competition-sensored-brushless-motor-21-5t","title":"Maclan MRR V3 Competition Sensored Brushless Motor (17.5T)","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe Maclan MRR V3 Competition Sensored Brushless Motor is the result of the latest efforts by Maclan Racing and is based on the successful V2 platform with various updates to improve overall performance. Improvements in this generation are significant and will make a noticeable performance gain.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE:\u003c\/strong\u003e This motor should not be paired with the Reedy Blackbox 510R 2S ESC (ASC27004, ASC27005). These ESCs deliver 3.3V from the sensor port, and Maclan V3 motors require a minimum of 4.8V.    \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngineered \u0026amp; Developed right here in the U.S.A.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpdated 1-piece precision machined motor can design that eliminates the need for long motor can screws. Redesign uses a total of 5 short screws. It saves weight and no more optional screws required.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved stator shape that meets the latest ROAR regulations for the highest legal performance.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRealigned sensor positions for more accurate reading.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePremium Ultra High Torque Rotor is now standard by default. You get best performance right out of the box. Available in 13.5, 17.5, 21.5 Turns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eAvailable Turns: \u003c\/strong\u003e17.5\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShort Stack:\u003c\/strong\u003e Yes\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCase Length: \u003c\/strong\u003e51.20mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCase Diameter:\u003c\/strong\u003e 36.00mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft Extension:\u003c\/strong\u003e 14.00mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft Size:\u003c\/strong\u003e 3.17mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWeight: \u003c\/strong\u003e147g±2g\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScrews Size (end cap):\u003c\/strong\u003e M2.5x6 (1.5mm Hex)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScrew Size (motor can):\u003c\/strong\u003e M2x6 (0.05\" Hex)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFront Bearing Size: ID:\u003c\/strong\u003e 3.175mm OD: 9.525mm H: 3.9675mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRear Bearing Size: ID:\u003c\/strong\u003e 3.175mm OD: 7.9375mm H: 3.5712mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePoles:\u003c\/strong\u003e 2-Pole\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDefault 13.5\/17.5\/21.5 Rotor:\u003c\/strong\u003e Premium Ultra High Torque Rotor\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eROAR Approved:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e17.5 Approved \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e13.5\/21.5 pending approval\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLimited Factory Warranty: \u003c\/strong\u003e120-Day\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790019649699,"sku":"MCL1051","price":149.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/mcl1051.jpg?v=1614967820"},{"product_id":"reedy-sonic-540-m3-rotor-spacer-set","title":"Reedy Sonic 540-M3 1\/12 Modified Brushless Motor (6.5T)","description":"\u003cp\u003eReedy Sonic 540-M3 1\/12 Modified Brushless Motor (6.5T)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":37790780719267,"sku":"ASC251","price":99.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/asc251.jpg?v=1614972589"},{"product_id":"tekin-gen4-eliminator-drag-racing-modified-brushless-motor-4-0t","title":"Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor (3.5T)","description":"\u003cp\u003e\u003cspan\u003eThe Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor is a purpose built Drag Racing motor, engineered for performance. Utilizing Oversized Ultra Torque rotors and the best materials available, Tekin designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe stator is precision stamped and pressed, increasing efficiency and reducing resistance. Every Eliminator motor is hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and fully re-buildable, the GEN4 Eliminator motor is a premium performance power plant for the serious drag racer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eInput Voltage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e1-2S LiPO - 2.5T \/ 3.5T \/ 4.0T \/ 4.5T \/ 5.0T\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e5.1oz \/ 145g\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShaft Dimensions:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e3.18mm (1\/8\") x 15.3mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Diameter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e35.85mm \/ 1.40\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Length:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e50.25mm \/ 1.978\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax Operating Temperature:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e180°F \/ 82°C\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eBearing Dimensions:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eFront: 4x13x5mm; Rear: 1\/8x3\/8x5\/32\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRotor Size:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e13mm TORQUE RED \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRebuildable:\u003c\/strong\u003e\u003cspan\u003e Yes\u003c\/span\u003e\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39310828634275,"sku":"TT2772","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tektt2772.jpg?v=1615004367"},{"product_id":"tekin-gen4-eliminator-drag-racing-modified-brushless-motor-4-5t","title":"Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor (4.0T)","description":"\u003cp\u003e\u003cspan\u003eThe Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor is a purpose built Drag Racing motor, engineered for performance. Utilizing Oversized Ultra Torque rotors and the best materials available, Tekin designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe stator is precision stamped and pressed, increasing efficiency and reducing resistance. Every Eliminator motor is hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and fully re-buildable, the GEN4 Eliminator motor is a premium performance power plant for the serious drag racer. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eInput Voltage: \u003c\/strong\u003e\u003cspan\u003e1-2S LiPO - 2.5T \/ 3.5T \/ 4.0T \/ 4.5T \/ 5.0T \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e\u003cspan\u003e5.1oz \/ 145g \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShaft Dimensions: \u003c\/strong\u003e\u003cspan\u003e3.18mm (1\/8\") x 15.3mm \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Diameter: \u003c\/strong\u003e\u003cspan\u003e35.85mm \/ 1.40\" \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Length: \u003c\/strong\u003e\u003cspan\u003e50.25mm \/ 1.978\" \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax Operating Temperature: \u003c\/strong\u003e\u003cspan\u003e180°F \/ 82°C \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eBearing Dimensions: \u003c\/strong\u003e\u003cspan\u003eFront: 4x13x5mm; Rear: 1\/8x3\/8x5\/32\" \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRotor Size: \u003c\/strong\u003e\u003cspan\u003e13mm TORQUE RED  \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRebuildable:\u003c\/strong\u003e\u003cspan\u003e Yes\u003c\/span\u003e\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39310828765347,"sku":"TT2759","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tektt2759.jpg?v=1615004368"},{"product_id":"tekin-gen4-eliminator-drag-racing-modified-brushless-motor-5-0t","title":"Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor (4.5T)","description":"\u003cp\u003e\u003cspan\u003eThe Tekin Gen4 Eliminator Drag Racing Modified Brushless Motor is a purpose built Drag Racing motor, engineered for performance. Utilizing Oversized Ultra Torque rotors and the best materials available, Tekin designed the Eliminator to cut weight while reducing resistance, resulting in a purebred Drag Racing machine. From Pro Mod to Street Eliminator classes, the Eliminator motors create huge power across all RPMs whenever you need it. The GEN4 Eliminator is competition performance with the speed and power you need to gap the competition.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe stator is precision stamped and pressed, increasing efficiency and reducing resistance. Every Eliminator motor is hand-wound with high purity copper wire and machined from 6061-T6 aluminum. Completely tunable with optional rotors and fully re-buildable, the GEN4 Eliminator motor is a premium performance power plant for the serious drag racer.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eInput Voltage:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e1-2S LiPO - 2.5T \/ 3.5T \/ 4.0T \/ 4.5T \/ 5.0T\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e5.1oz \/ 145g\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShaft Dimensions:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e3.18mm (1\/8\") x 15.3mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Diameter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e35.85mm \/ 1.40\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMotor Length:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e50.25mm \/ 1.978\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax Operating Temperature:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e180°F \/ 82°C\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eBearing Dimensions:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eFront: 4x13x5mm; Rear: 1\/8x3\/8x5\/32\"\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRotor Size:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e13mm TORQUE RED \u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRebuildable:\u003c\/strong\u003e\u003cspan\u003e Yes\u003c\/span\u003e\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39310828830883,"sku":"TT2771","price":159.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tektt2771.jpg?v=1615004369"},{"product_id":"tekin-hd-t-series-rock-crawler-brushed-motor-35t","title":"Tekin Gen4 Spec-R Sensored Brushless Motor (21.5T)","description":"\u003cp\u003eTekin Gen4 Spec-R Sensored Brushless Motor (21.5T)\u003c\/p\u003e","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":39310832500899,"sku":"TT2761","price":159.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tektt2761.jpg?v=1615004381"},{"product_id":"tekin-roc412-hd-element-proof-sensored-brushless-crawler-motor-4200kv","title":"Tekin ROC412 HD Element Proof Sensored Brushless Crawler Motor (3100kV)","description":"\u003cp\u003eTekin ROC412 HD Element Proof Sensored Brushless Crawler Motor (3100kV)\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39310840660131,"sku":"TEKTT2631","price":219.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tektt2631.jpg?v=1615004453"},{"product_id":"xerun-1-8-competition-g3-motor-4268sd-2000kv","title":"Hobbywing XERUN 1\/8 Competition G3 Motor 4268SD-1900kv","description":"\u003cp\u003eHobbywing Xerun 4268SD G3, 1900Kv 1\/8 Scale Sensored Brushless Motor.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1900Kv recommended for 1\/8 off road\u003c\/li\u003e\n\u003cli\u003eTurbo Timing Technology\u003c\/li\u003e\n\u003cli\u003eFull Sensored mode (when paired with XR8 ESC)\u003c\/li\u003e\n\u003cli\u003eAdjustable Timing (Bi-Directional) 20-40 degrees\u003c\/li\u003e\n\u003cli\u003eAdvanced Hall Sensor System\u003c\/li\u003e\n\u003cli\u003e4-pole-8-magnet \"Staggered Pole\" rotor - HOBBYWING Patented design\u003c\/li\u003e\n\u003cli\u003eGuarantees users the effective heat dissipation and dust prevention\u003c\/li\u003e\n\u003cli\u003eThe use of double insulated windings (240°C R-rated), NMB bearings from Japan, and the high-intensity adhesive (340°C) guarantees users the outstanding performance and super durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eKv:\u003c\/strong\u003e 1900Kv\u003cbr\u003e\u003cstrong\u003ePole:\u003c\/strong\u003e 4\u003cbr\u003e\u003cstrong\u003eLiPo:\u003c\/strong\u003e 2S-6S\u003cbr\u003e\u003cstrong\u003eResistance:\u003c\/strong\u003e 0.0075\u003cbr\u003e\u003cstrong\u003eNo Load Current:\u003c\/strong\u003e 4A\u003cbr\u003e\u003cstrong\u003eSize (Diameter x Length):\u003c\/strong\u003e 42x68mm\u003cbr\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e315g\u003cbr\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e 1\/8 Off Road\u003c\/p\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321963626659,"sku":"HW30401906","price":229.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/hwa30401906.jpg?v=1647377053"},{"product_id":"xerun-justock-3650-sd-g2-1-motor-17-5t","title":"Hobbywing XeRun Justock 3650 SD G2.1 Motor, 13.5T","description":"Application of the Justock 3650 SD G2.1 motor is for the Stock or Sport Class of 1\/10th, 1\/12th on-road and off-road racing, normal training and rock crawlers. \u003cbr\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eBuilt-in hall sensor, non-adjustable end bell is combined with a high precision and balanced rotor.\u003c\/li\u003e\u003cli\u003eSilicone O-ring seal is fitted between the end bell and stator.\u003c\/li\u003e\u003cli\u003eIFMAR and ROAR approved\u003c\/li\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eLiPo: 2-3S\u003c\/li\u003e\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\u003cli\u003eLength: 52.5mm\u003c\/li\u003e\u003cli\u003eWeight: 175g\u003c\/li\u003e\u003cli\u003eNo-Load Current:4A\u003c\/li\u003e\u003cli\u003eMax Output Power: 215W\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321966444707,"sku":"HW30408010","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunjustock.jpg?v=1615129355"},{"product_id":"xerun-v10-g3-10-5t-sensored-brushless-motor","title":"HobbyWing XeRun V10 G3 7.5T Sensored Brushless Motor","description":"Designed for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003cbr\u003e\u003cbr\u003eApplication: 1\/10th Drift, 2WD Off-road Racing\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eLightweigt\u003c\/li\u003e\u003cli\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/li\u003e\u003cli\u003eThe mechanical timing can be adjusted.\u003c\/li\u003e\u003cli\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/li\u003e\u003cli\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/li\u003e\u003cli\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/li\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003e2 POLE Super High-Efficiency brushless motor\u003c\/li\u003e\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\u003cli\u003eLength: 51.2mm\u003c\/li\u003e\u003cli\u003eShaft Length: 13.3mm\u003c\/li\u003e\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321968836771,"sku":"HW30401110","price":139.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunv10g3_efb4eef8-0ccd-4743-837e-f3f7d4a036d9.jpg?v=1615129370"},{"product_id":"xerun-v10-g3-4-5t-sensored-brushless-motor","title":"Hobbywing XeRun V10 G3, 3.5T Sensored Brushless Motor","description":"Designed for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003cbr\u003e\u003cbr\u003eApplication: 1\/10-1\/12 Scale On-Road Racing\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eLightweigt\u003c\/li\u003e\u003cli\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/li\u003e\u003cli\u003eThe mechanical timing can be adjusted.\u003c\/li\u003e\u003cli\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/li\u003e\u003cli\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/li\u003e\u003cli\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/li\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003e2 POLE Super High-Efficiency brushless motor\u003c\/li\u003e\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\u003cli\u003eLength: 51.2mm\u003c\/li\u003e\u003cli\u003eShaft Length: 13.3mm\u003c\/li\u003e\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321969229987,"sku":"HW30401106","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunv10g3_bf4ff23b-f3ca-4a02-a5ac-17bee1b178bf.jpg?v=1615129377"},{"product_id":"xerun-v10-g3-6-5t-sensored-brushless-motor","title":"Hobbywing XeRun V10 G3, 5T Sensored Brushless Motor","description":"Designed for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003cbr\u003e\u003cbr\u003eApplication: 1\/10-1\/12 Scale On-Road Racing\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eLightweigt\u003c\/li\u003e\u003cli\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/li\u003e\u003cli\u003eThe mechanical timing can be adjusted.\u003c\/li\u003e\u003cli\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/li\u003e\u003cli\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/li\u003e\u003cli\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/li\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003e2 POLE Super High-Efficiency brushless motor\u003c\/li\u003e\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\u003cli\u003eLength: 51.2mm\u003c\/li\u003e\u003cli\u003eShaft Length: 13.3mm\u003c\/li\u003e\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321969754275,"sku":"HW30401116","price":139.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunv10g3_100f07a2-28a7-4e1f-92b3-24ad808e75cd.jpg?v=1615129381"},{"product_id":"xerun-v10-g3-6t-sensored-brushless-motor","title":"HobbyWing XeRun V10 G3, 6.5T Sensored Brushless Motor","description":"Designed for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003cbr\u003e\u003cbr\u003eApplication: 1\/10 Scale 4WD Off-Road Racing\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eLightweigt\u003c\/li\u003e\u003cli\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/li\u003e\u003cli\u003eThe mechanical timing can be adjusted.\u003c\/li\u003e\u003cli\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/li\u003e\u003cli\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/li\u003e\u003cli\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/li\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003e2 POLE Super High-Efficiency brushless motor\u003c\/li\u003e\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\u003cli\u003eLength: 51.2mm\u003c\/li\u003e\u003cli\u003eShaft Length: 13.3mm\u003c\/li\u003e\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321969819811,"sku":"HW30401109","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunv10g3_cca764e6-134a-4b39-8380-96d63bf18493.jpg?v=1615129383"},{"product_id":"xerun-v10-g3-8-5t-sensored-brushless-motor","title":"Hobbywing XeRun V10 G3, 7T Sensored Brushless Motor","description":"Designed for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003cbr\u003e\u003cbr\u003eApplication: 1\/10th Drift, 2WD Off-road Racing\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cli\u003eLightweight\u003c\/li\u003e\n\u003cli\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/li\u003e\n\u003cli\u003eThe mechanical timing can be adjusted.\u003c\/li\u003e\n\u003cli\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/li\u003e\n\u003cli\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/li\u003e\n\u003cli\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/li\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cli\u003e2 POLE Super High-Efficiency brushless motor\u003c\/li\u003e\n\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\n\u003cli\u003eLength: 51.2mm\u003c\/li\u003e\n\u003cli\u003eShaft Length: 13.3mm\u003c\/li\u003e\n\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321970049187,"sku":"HW30401118","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunv10g3_5e91ffb5-6849-41eb-82b7-1c56f7b6d9e4.jpg?v=1615129386"},{"product_id":"xerun-v10-g3r-13-5-t-sensored-brushless-motor","title":"HobbyWing XeRun V10 G3, 8.5T Sensored Brushless Motor","description":"Designed for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003cbr\u003e\u003cbr\u003eApplication: 1\/10th Drift, 2WD Off-road Racing\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eLightweigt\u003c\/li\u003e\u003cli\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/li\u003e\u003cli\u003eThe mechanical timing can be adjusted.\u003c\/li\u003e\u003cli\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/li\u003e\u003cli\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/li\u003e\u003cli\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/li\u003e\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003e2 POLE Super High-Efficiency brushless motor\u003c\/li\u003e\u003cli\u003eDiameter: 35.9mm\u003c\/li\u003e\u003cli\u003eLength: 51.2mm\u003c\/li\u003e\u003cli\u003eShaft Length: 13.3mm\u003c\/li\u003e\u003cli\u003eShaft Diameter: 3.17mm\u003c\/li\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":39321970114723,"sku":"HW30401111","price":169.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/xerunv10g3_f60772a9-4f63-41e6-a348-cdecda3cb90c.jpg?v=1615129388"},{"product_id":"drag-master-2-5t-holeshot-brushless-motor","title":"Trinity Drag Master 2.0T Holeshot Brushless Motor","description":"Designed for all out power and speed needed for Extreme  - Drag Racing, Pan Cars \u0026amp; Touring Cars \u003cbr\u003e\u003cbr\u003eStandard Race SPEC Features:\u003cbr\u003e\u003cbr\u003eAluminum based sensor board for true sensor alignment\u003cbr\u003eInfinite Timing Adjustment\u003cbr\u003e2mm Copper Tabs\u003cbr\u003eThicker Pure Copper Solder Tabs and Collector\u003cbr\u003eThermal Stator Coating for the best heat dissipation possible\u003cbr\u003eTurbine style vented nose\u003cbr\u003eMore Vents for More Cooling\u003cbr\u003e220C wire coating\u003cbr\u003eCertified Gauge High Temperature Wire\u003cbr\u003eShort Stack Stator Design\u003cbr\u003eStator Material\u003cbr\u003eGrade 5 Ball Bearings\u003cbr\u003eUses all D3.5, D4  and 24K Rotors\u003cbr\u003e10,000+Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number. \u003cbr\u003e\u003cbr\u003e* MAX Voltage 11.1v 3 Cell Lipo Battery","brand":"HRP","offers":[{"title":"Default Title","offer_id":39322627113123,"sku":"TRIDM20","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tridm20_44d043ff-d4ac-4449-88e5-09a758a4cc21.jpg?v=1615044439"},{"product_id":"drag-master-3-0t-holeshot-brushless-motor","title":"Trinity Drag Master 2.5T Holeshot Brushless Motor","description":"Designed for all out power and speed needed for Extreme  - Drag Racing, Pan Cars \u0026amp; Touring Cars \u003cbr\u003e\u003cbr\u003eStandard Race SPEC Features:\u003cbr\u003e\u003cbr\u003eAluminum based sensor board for true sensor alignment\u003cbr\u003eInfinite Timing Adjustment\u003cbr\u003e2mm Copper Tabs\u003cbr\u003eThicker Pure Copper Solder Tabs and Collector\u003cbr\u003eThermal Stator Coating for the best heat dissipation possible\u003cbr\u003eTurbine style vented nose\u003cbr\u003eMore Vents for More Cooling\u003cbr\u003e220C wire coating\u003cbr\u003eCertified Gauge High Temperature Wire\u003cbr\u003eShort Stack Stator Design\u003cbr\u003eStator Material\u003cbr\u003eGrade 5 Ball Bearings\u003cbr\u003eUses all D3.5, D4  and 24K Rotors\u003cbr\u003e10,000Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number. \u003cbr\u003e\u003cbr\u003e* MAX Voltage 11.1v 3 Cell Lipo Battery","brand":"HRP","offers":[{"title":"Default Title","offer_id":39322627342499,"sku":"TRIDM25","price":189.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tridm25_9b07694c-bd55-4877-99a3-7c5b70bc3199.jpg?v=1615044441"},{"product_id":"drag-master-3-5t-holeshot-brushless-motor","title":"Trinity Drag Master 3.0T Holeshot Brushless Motor","description":"Designed for all out power and speed needed for Extreme  - Drag Racing, Pan Cars \u0026amp; Touring Cars \u003cbr\u003e\u003cbr\u003eStandard Race SPEC Features:\u003cbr\u003e\u003cbr\u003eAluminum based sensor board for true sensor alignment\u003cbr\u003eInfinite Timing Adjustment\u003cbr\u003e2mm Copper Tabs\u003cbr\u003eThicker Pure Copper Solder Tabs and Collector\u003cbr\u003eThermal Stator Coating for the best heat dissipation possible\u003cbr\u003eTurbine style vented nose\u003cbr\u003eMore Vents for More Cooling\u003cbr\u003e220C wire coating\u003cbr\u003eCertified Gauge High Temperature Wire\u003cbr\u003eShort Stack Stator Design\u003cbr\u003eStator Material\u003cbr\u003eGrade 5 Ball Bearings\u003cbr\u003eUses all D3.5, D4  and 24K Rotors\u003cbr\u003e9550Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number. \u003cbr\u003e\u003cbr\u003e* MAX Voltage 11.1v 3 Cell Lipo Battery","brand":"HRP","offers":[{"title":"Default Title","offer_id":39322627440803,"sku":"TRIDM30","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tridm30_27516748-5934-4242-b036-87f25114cc2a.jpg?v=1615044442"},{"product_id":"featherweight-aluminum-pinion-gear-64-pitch-54-tooth","title":"Trinity Drag Master 5.0T Holeshot Brushless Motor","description":"Designed for all out power and speed needed for Extreme  - Drag Racing, Pan Cars \u0026amp; Touring Cars \u003cbr\u003e\u003cbr\u003eStandard Race SPEC Features:\u003cbr\u003e\u003cbr\u003eAluminum based sensor board for true sensor alignment\u003cbr\u003eInfinite Timing Adjustment\u003cbr\u003e2mm Copper Tabs\u003cbr\u003eThicker Pure Copper Solder Tabs and Collector\u003cbr\u003eThermal Stator Coating for the best heat dissipation possible\u003cbr\u003eTurbine style vented nose\u003cbr\u003eMore Vents for More Cooling\u003cbr\u003eNew 220C wire coating\u003cbr\u003eCertified Gauge High Temperature Wire\u003cbr\u003eNew Short Stack Stator Design\u003cbr\u003eNew Stator Material\u003cbr\u003eGrade 5 Ball Bearings\u003cbr\u003eUses all D3.5, D4  and 24K Rotors\u003cbr\u003e8150Kv this number is approximate set as Zero Degrees of Timing. Sensored Brushless Motors are not rated in Kv's due to the fact that timing and voltage can effect the Kv number. \u003cbr\u003e\u003cbr\u003e* MAX Voltage 11.1v 3 Cell Lipo Battery","brand":"HRP","offers":[{"title":"Default Title","offer_id":39322628554915,"sku":"TRIDM50","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tridm50a_a79aa6f3-f201-48d8-bda3-fbadaa652e4d.jpg?v=1615044447"},{"product_id":"x-factor-13t","title":"RevTech X Factor 13.5T Team Spec","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eProduction Base Motor\u003c\/li\u003e\u003cli\u003eThorough visual inspection for any issues including timing, shimming and loose screws\u003c\/li\u003e\u003cli\u003eEach and every production Motor Stator is tested and only the TOP 5% are labeled as Team SPEC 5%\u003c\/li\u003e\u003cli\u003eStator Resistance Numbers are Marked on the Inside of the box then then box is Sealed with a Special Team SPEC Label.\u003c\/li\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39322639368355,"sku":"REV1101T","price":229.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/trirev1101t_8c460940-0d4c-4251-bd0e-3e81e6959ad2.jpg?v=1615044571"},{"product_id":"1-10-4-pole-sensored-brushless-motor-1406-5700kv-4mm-bullet","title":"Castle 1\/10 4-Pole Sensored Brushless Motor, 1406-4600Kv: 4mm Bullet","description":"\u003cp\u003e\u003cspan\u003eCastle Creations 1406 Sensored 4-Pole Brushless Motors combine rotor position sensor technology with an improved high power and high efficiency motor design to deliver ultra smooth startup, precise low speed control, predictable power delivery, incredible torque, and lightning fast response. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup, and allows the 1406 to deliver PRECISE throttle control and BUTTERY SMOOTH starts - with the RAW POWER and LONGER RUN TIMES that Castle motors are known for\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEFFICIENCY IS KEY\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRELIABILITY CAN’T BE IGNORED\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWithout a robust and reliable design, efficiency will only go so far. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Proprietary winding techniques allow Castle to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eINTEGRATED SOPHISTICATION\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCastle engineers always add a little something extra in their designs that takes your performance to the next level. When paired with a Castle Creations sensor supported ESC, like the MAMBA MICRO X, MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. With a Castle sensored ESC and sensored motor you will have the ULTIMATE POWER PLANT for your vehicle.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSMARTSENSE™\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSMARTSENSE uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA- EFFICIENT sensorless mode. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at all load points. Using mechanical timing adjustments alone, you can only target one driving condition, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other driving phases. Electronic timing in SMARTSENSE will advance timing automatically for peak performance during all driving conditions. This allows users to combine the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless drive. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT\u003c\/li\u003e\n\u003cli\u003eOversized gold plated solder tabs for LESS RESISTANCE and easy soldering\u003c\/li\u003e\n\u003cli\u003eQUIETSENSE\u003csup\u003e™\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003eTechnology shields magnetic field noise generated from the motor coils and keeps motor and ESC in sync at all times\u003c\/li\u003e\n\u003cli\u003eHIGHER PRECISION and MORE EFFICIENT startups\u003c\/li\u003e\n\u003cli\u003eOPTIMIZED design eliminates the need for mechanical timing adjustments\u003c\/li\u003e\n\u003cli\u003eSensor alignment method delivers uniform timing and torque in both directions, automatically\u003c\/li\u003e\n\u003cli\u003eREBUILDABLE design allows users to replace front end bell with bearings or rotors with shaft\u003c\/li\u003e\n\u003cli\u003eROAR standard sensor port and labeled connections\u003c\/li\u003e\n\u003cli\u003eHigh strength 180°C neodymium sintered magnets\u003c\/li\u003e\n\u003cli\u003eHigh quality, temperature-stabilized sensors\u003c\/li\u003e\n\u003cli\u003eHigh-purity, high-temperature copper windings\u003c\/li\u003e\n\u003cli\u003eHardened stainless steel shaft\u003c\/li\u003e\n\u003cli\u003e13 AWG high strand wire with silicone insulation\u003c\/li\u003e\n\u003cli\u003eKevlar wrapped rotor\u003c\/li\u003e\n\u003cli\u003e6061-T6 Billet aluminum heatsink can\u003c\/li\u003e\n\u003cli\u003eHigh RPM NMB oversized bearings\u003c\/li\u003e\n\u003cli\u003eHigh quality 0.2mm steel laminations\u003c\/li\u003e\n\u003cli\u003eLow resistance gold plated bullet connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Castle 1406 Comparison Chart\" height=\"261\" width=\"303\" src=\"https:\/\/images.amain.com\/images\/Link%20Images\/Castle_1406_Comparison_Chart.JPG\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003cbr\u003eInput Voltage Range:\u003c\/strong\u003e\u003cspan\u003e 2-3S LiPo\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eKv:\u003c\/strong\u003e\u003cspan\u003e 4600\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. RPM:\u003c\/strong\u003e\u003cspan\u003e 100,000\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eLength:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e49.5mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e\u003cspan\u003e 36mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eWeight (w\/wires):\u003c\/strong\u003e\u003cspan\u003e 197 g \/ 6.9oz\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eShaft Size:\u003c\/strong\u003e\u003cspan\u003e 15mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e\u003cspan\u003e 1\/8\" (3.17mm)\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMounting Hole Specifications:\u003c\/strong\u003e\u003cspan\u003e M3 @ 25mm\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eCooling Fan:\u003c\/strong\u003e\u003cspan\u003e Optional - Coming Soon\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eConnectors:\u003c\/strong\u003e\u003cspan\u003e 4mm male Castle Bullet Connectors\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eApplication Guidelines:\u003c\/strong\u003e\u003cspan\u003e 1:10 scale 2WD SCT, on-road touring, stadium truck and buggies\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eRecommended ESC(s):\u003c\/strong\u003e\u003cspan\u003e Mamba Max Pro\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eMax. Recommended Vehicle Weight:\u003c\/strong\u003e\u003cspan\u003e 2WD SCT Trucks up to 5lbs, stadium trucks, bugies, and on-road vehicles up to 4lbs.\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTech Notes:\u003c\/strong\u003e\u003cspan\u003e Running modes: SMARTSENSE™, Sensored, Sensorless\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39379793182883,"sku":"060-0056-00","price":139.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/CSE060005600_A0_YMPNLACP.jpg?v=1764030886"},{"product_id":"4-pole-sensored-brushless-motor-1717-1650kv","title":"Castle 1\/10 4-Pole Sensored Brushless Motor, 1406-3800Kv: 4mm Bullet","description":"\u003cp\u003eIdeal for 1\/10 scale rock crawlers, trail rigs, touring cars, stadium trucks and buggies on 2S-4S with appropriate gearing.\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39379796000931,"sku":"060-0071-00","price":169.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/CSE060007100_A0_AN7J3C44.jpg?v=1764030868"},{"product_id":"firma-3300kv-brushless-motor","title":"Spektrum Firma Brushless Motor, 1250Kv, 6.5mm Bullet","description":"\u003cdiv class=\"mx-auto mb-1\" style=\"max-width:930px\"\u003e\n\t\n\t\u003c!-- Start Key Features --\u003e  \n\u003ch3 id=\"featureList\"\u003eKey Features\u003c\/h3\u003e\n\u003cdiv id=\"featureListDiv\" class=\"wrapDiv\"\u003e\n \u003cul\u003e \n  \n\n\t\u003cli\u003ePerfect upgrade for the ARRMA Limitless Speed Roller\u003c\/li\u003e\n\t\u003cli\u003eHgh Efficiency Design\u003c\/li\u003e\n\t\u003cli\u003eHigh-quality 4-pole sintered rotors\u003c\/li\u003e\n\t\u003cli\u003eIncludes 6.5mm gold plated bullet connectors\u003c\/li\u003e\n\t\u003cli\u003ePrecision ball bearings and hardened steel 5mm shaft\u003c\/li\u003e\n\n\n \n \u003c\/ul\u003e\t \n\n\t\u003c\/div\u003e \n  \n  \n\n\u003c!--- Stop Key Features --\u003e\n\u003c!-- Start Overview --\u003e\n\u003ch3 id=\"consumerWebCopy\"\u003eOverview\u003c\/h3\u003e\n\u003cdiv id=\"consumerWebCopyDiv\" class=\"wrapDiv\"\u003e\n\t\u003cp\u003ePerfect option for larger scale models looking to run a 8S Lipo powered setup. Low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 5mm output shaft, and high-precision bearings for high durability and smooth rotation. Preinstalled with 6.5mm gold plated bullet connectors. Perfectly matched to the Firma 160 Smart ESC.\u003c\/p\u003e\n    \n\u003c\/div\u003e    \n\u003c!--- Stop Overview --\u003e\n\n\u003c!-- Start Whats in the box --\u003e            \n\u003cdiv class=\"row whatsinbox\"\u003e\n\u003cdiv class=\"columns col-lg-6 col-sm-12\"\u003e\n  \u003cstrong\u003eNeeded to Complete\u003c\/strong\u003e\n  \u003cul\u003e\n     \t\t\n \u003cli\u003eElectronic Speed Control such as the Firma 160 Smart ESC\u003c\/li\u003e\n\t  \n\t  \n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"columns col-lg-6 col-sm-12\"\u003e\n  \u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\n  \u003cul\u003e\n             \n    \n  \n\u003cli\u003eSpektrum Firma 4985-1250Kv Sensorless 1\/7-1\/5 Brushless Motor with 6.5mm Gold Plated Bullet Connectors\u003c\/li\u003e\n\t  \n\t  \n\t  \n\t  \n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!--- Stop Whats in the box --\u003e   \n\n\n\u003c\/div\u003e","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":39385643647139,"sku":"SPMXSM1200","price":199.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/SPMXSM1200_A0_U6PSUWNX.jpg?v=1615309698"},{"product_id":"firma-4000kv-brushless-motor","title":"Spektrum Firma 3300Kv Brushless Motor","description":"\u003cstyle\u003e\u003c!--\n\t\t.mediaFeature {padding:2px 0;}\n\t\n--\u003e\u003c\/style\u003e\n\u003cstyle\u003e\u003c!--\n\t.aligncenter {\n\t\ttext-align: center;\n\t}\n\t\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"mx-auto mb-1\" style=\"max-width: 930px;\"\u003e\n\u003cdiv class=\"landing-content\"\u003e\n\u003c!-- Start Overview --\u003e\n\u003cdiv id=\"consumerWebCopyDiv\" class=\"wrapDiv\"\u003e\n\u003ch3 id=\"consumerWebCopy\"\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Firma 3300Kv brushless motor is a great choice for 1\/10 scale 4WD, 2WD and on-road models running on 2S ??? 3S LiPo power. Featuring a low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 3.175mm (1\/8\") output shaft, and precision bearings for high durability and smooth rotation. Preinstalled with 4mm gold plated bullet connectors for easy installation, and perfectly matched for the Firma 85A Smart ESC.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- Stop Overview --\u003e \u003c!-- Start Features --\u003e\n\u003cdiv id=\"featureListDiv\" class=\"wrapDiv\"\u003e\n\u003ch3 id=\"featureList\"\u003eFeatures\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featureListDiv\" class=\"row\"\u003e\n\u003cdiv class=\"columns col-lg-6 col-sm-12\"\u003e\n\u003cli\u003eExcellent upgrade for 540- and 550-size brushed motors with the same diameter and mounting pattern (vehicle must accept pinions with a 1\/8\" mm bore)\u003c\/li\u003e\n\u003cli\u003eHigh-quality 4-pole sintered rotor\u003c\/li\u003e\n\u003cli\u003e4mm gold plated bullet connectors\u003c\/li\u003e\n\u003cli\u003eHigh-quality construction with precision ball bearings and hardened steel 1\/8\" shaft\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- End Features --\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":39385643974819,"sku":"SPMXSM1300","price":59.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/SPMXSM1300_A0_B8N033ZU.jpg?v=1615309700"},{"product_id":"firma-3200kv-4-pole-bl-motor-3660","title":"Spektrum Firma 2050Kv Brushless Motor","description":"\u003cstyle\u003e\u003c!--\n\t\t.mediaFeature {padding:2px 0;}\n\t\n--\u003e\u003c\/style\u003e\n\u003cstyle\u003e\u003c!--\n\t.aligncenter {\n\t\ttext-align: center;\n\t}\n\t\n--\u003e\u003c\/style\u003e\n\u003cdiv class=\"mx-auto mb-1\" style=\"max-width: 930px;\"\u003e\n\u003cdiv class=\"landing-content\"\u003e\n\u003c!-- Start Overview --\u003e\n\u003cdiv id=\"consumerWebCopyDiv\" class=\"wrapDiv\"\u003e\n\u003ch3 id=\"consumerWebCopy\"\u003eOverview\u003c\/h3\u003e\n\u003cp\u003eThe Firma 2050Kv brushless motor is a perfect option for 1\/7 and 1\/8 scale buggy, truggy or monster trucks with a 3S-6S LiPo powered setup. Featuring a low cog 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 4mm output shaft, and precision bearings for high durability and smooth rotation. Preinstalled with 4mm gold plated bullet connectors for easy installation, and perfectly matched for the Firma 150 Smart ESC.\u003c\/p\u003e\n\u003c!-- Start Features --\u003e\n\u003cdiv id=\"featureListDiv\" class=\"wrapDiv\"\u003e\n\u003ch3 id=\"featureList\"\u003eFeatures\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"featureListDiv\" class=\"row\"\u003e\n\u003cdiv class=\"columns col-lg-6 col-sm-12\"\u003e\n\u003cli\u003ePerfect upgrade for 1\/7 and 1\/8 scale racers and bashers\u003c\/li\u003e\n\u003cli\u003eSafe-D Shaft provides a C-clip locking point to prevent pinion gear slip\u003c\/li\u003e\n\u003cli\u003eHigh efficiency design\u003c\/li\u003e\n\u003cli\u003e6S LiPo power capable\u003c\/li\u003e\n\u003cli\u003eHigh-quality 4-pole sintered rotor\u003c\/li\u003e\n\u003cli\u003e4mm gold plated bullet connectors\u003c\/li\u003e\n\u003cli\u003eHigh-quality construction with precision ball bearings and hardened steel 4mm shaft\u003c\/li\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c!-- End Features --\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":39385644662947,"sku":"SPMXSM1700","price":179.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/SPMXSM1700_A0_QX6QIPZX.jpg?v=1615309705"},{"product_id":"castle-creations-1717-1650kv-four-pole-brushless-sensored-motor-for-1-6-scale","title":"Castle Creations 1717-1650KV Four-Pole Brushless Sensored Motor for 1\/6 Scale","description":"\u003cp\u003eThe Castle Creations 1717, 1650KV Sensored 4-Pole Brushless Motor is a blast from the past with the added benefit of sensored capabilities! Featuring an improved 4-POLE 12-SLOT design, the sensored 1717 boasts exceptional efficiency and will generate less heat than comparable motors. This motor is a great option for any 1\/6th scale model weighing up to 20 lbs and running up to 8s LiPo. The 1717 is also a great upgrade for drivers looking for an incredibly high torque 8s motor for 1\/8th scale models as well!\u003c\/p\u003e\n\u003cp\u003eWithout a robust and reliable design, efficiency will only go so far. Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of this motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRunning modes include Sensored and an ULTRA-EFFICIENT sensorless mode.\u003c\/li\u003e\n\u003cli\u003eHigh-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions.\u003c\/li\u003e\n\u003cli\u003eOversized NMB bearings and vibration dampening system ensure the longest bearing life possible.\u003c\/li\u003e\n\u003cli\u003eProprietary winding techniques produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor.\u003c\/li\u003e\n\u003cli\u003eUpdated modern and sleek design; looks as cool as it performs.\u003c\/li\u003e\n\u003cli\u003eIMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT.\u003c\/li\u003e\n\u003cli\u003eQUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups.\u003c\/li\u003e\n\u003cli\u003eOPTIMIZED design eliminates the need for mechanical timing adjustments. Sensor alignment method delivers uniform timing and torque in both directions, automatically.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eInput Voltage Range:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e8S LiPo Max\u003cbr\u003e\u003cstrong\u003eKv:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e1650\u003cbr\u003e\u003cstrong\u003eMax. RPM:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e56,000\u003cbr\u003e\u003cstrong\u003eSize:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eDiameter: 1.87” (47.6mm) Length: 3.35” (85.1mm)\u003cbr\u003e\u003cstrong\u003eWeight (w\/wires):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e21.08 oz.\/597.6g\u003cbr\u003e\u003cstrong\u003eShaft Size:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eLength: 20mm\u003cbr\u003e\u003cstrong\u003eDiameter:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e5mm\u003cbr\u003e\u003cstrong\u003eMounting Hole Specifications:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eM3 and M4 @ 25.4mm (1\")\u003cbr\u003e\u003cstrong\u003eCooling Fan:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eN\/A\u003cbr\u003e\u003cstrong\u003eConnectors:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e6.5mm male bullets\u003cbr\u003e\u003cstrong\u003eRecommended ESC(s):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eMamba Monster X 8S\u003cbr\u003e\u003cstrong\u003eMax. Recommended Vehicle Weight:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eVehicles weighing less than 20lbs.\u003cbr\u003e\u003cstrong\u003eRunning modes:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eSensorless and Sensored\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Use Statements:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMonitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Guidelines:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe 1717-1650Kv is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to the owners manual for running and maintaining motors in wet environments.\u003c\/p\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":39521225343139,"sku":"060-0081-00","price":309.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/cas060-0081-00.jpg?v=1616529410"},{"product_id":"traxxas-motor-velineon-540xl-2400kv-70mm-brushless-assembled-with-12-gauge-wire-and-gold-plated-bullet-connectors-for-maxx","title":"Traxxas Motor, Velineon 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx)","description":"\u003cp\u003eTraxxas Motor, Velineon 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx)\u003c\/p\u003e","brand":"Traxxas","offers":[{"title":"Default Title","offer_id":39521456226467,"sku":"TRA3461","price":174.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/tra3461.jpg?v=1616531579"},{"product_id":"dynamite-2950kv-8-pole-brushless-outrunner-marine-motor-28x29mm","title":"Dynamite 2950Kv 8-Pole Brushless Outrunner Marine Motor, 28x29mm","description":"Dynamite 2950Kv 8-Pole Brushless Outrunner Marine Motor, 28x29mm","brand":"Horizon Hobby","offers":[{"title":"Default Title","offer_id":42295808589987,"sku":"DYNM3950","price":29.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/DYNM3950.jpg?v=1646680475"},{"product_id":"ecopower-sling-shot-slv2-sensored-brushless-drag-racing-motor-3-5t","title":"EcoPower \"Sling Shot SLV2\" Sensored Brushless Drag Racing Motor (17.5T)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe EcoPower \"Sling Shot SLV2\" Sensored Brushless 17.5 Turn Drag Racing Motor was developed specifically for No Prep and Street Eliminator class drag racing. The SLV2 Drag starts with a heavily vented, lightweight can to reduce overall weight and offer efficient heat dissipation. The can houses a big wire, high purity copper, hand wound stator and high torque 13.0mm sintered Neodymium rotor to create a high torque motor option that can run with the big dogs.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eOther features include large solder tabs to reduce resistance and help make it easier to attach the wires. Plus, fully adjustable timing lets you fine tune the power delivery to the surface conditions, while dual sensor ports allow easy installation in a variety of chassis configurations. These parts have been combined to deliver high end power and competition ready performance, at a sport motor price. Keep your competition in the crosshairs - take aim and fire with the Sling Shot.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavily Vented, Lightweight Can - Reduced Weight, Efficient Heat Dissipation\u003c\/li\u003e\n\u003cli\u003eHand Wound Big Wire, High Purity Copper Stator - Low Resistance \u003c\/li\u003e\n\u003cli\u003e13.0mm Rotor - High Torque \u003c\/li\u003e\n\u003cli\u003eLarge Solder Tabs - Low Resistance, Easier Soldering \u003c\/li\u003e\n\u003cli\u003eDual Sensor Ports - Works in Multiple Platforms\u003c\/li\u003e\n\u003cli\u003eFully Adjustable Timing \u003c\/li\u003e\n\u003cli\u003eHand Wound \u003c\/li\u003e\n\u003cli\u003e150mm Flat Sensor Wire Included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":42298651410595,"sku":"ECP-8006","price":49.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ecp-8005.jpg?v=1646762132"},{"product_id":"holmes-hobbies-revolver-v2-540-sensorless-brushless-outrunner-motor-1800kv","title":"Holmes Hobbies Revolver V2 540 Sensorless Brushless Outrunner Motor (1800kV)","description":"\u003cdiv data-mce-fragment=\"1\"\u003eThis Holmes Hobbies Revolver V2 540 Sensorless Brushless Outrunner Motor is an extremely torque dense and lightweight choice with exceptional startup and feel that rivals brushed motors. The 540 model is two times more powerful than the \"Snubnose 540\" model, and provides an unmatched torque-dense driving sensation similar to a diesel engine.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBolts up to standard \"540\" mount\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmall and light, yet higher torque than 540 brushed motors\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\/8\" shaft fits common R\/C pinions\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e200mm 14ga silicon motor leads (does not include bullets)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBrushless DC Outrunner Motor\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e14 pole 12 slot stator\u003cbr data-mce-fragment=\"1\"\u003eBattery: \u003cspan data-mce-fragment=\"1\"\u003e2-4S Lipo\u003c\/span\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMounting pattern:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e25mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMounting screws:\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eM3\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e1\/8\" D Shaft\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDiameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e35mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLength:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e36.8mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWeight:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e143g w\/ wires\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1:10 scale Trail and Scale rigs (SCX10, SCX10ii, Wraith 1.9, Enduro, TRX4 Sport,TrailFinder 2, etc..)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompetitive RC Rock Crawling (RECON G6; SORRCA; WRCCA; etc..)  \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEducational, Recon, or Battle Robots\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e540 is recommended for \"rock racers\" and 2 speed vehicles, such as the TRX4, Wraith, Bomber, etc... \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":42298712686755,"sku":"120100063","price":124.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/hhb120100063.jpg?v=1646764488"},{"product_id":"holmes-hobbies-puller-pro-stubby-v2-waterproof-sensored-crawler-motor-2200kv","title":"Holmes Hobbies Puller Pro Stubby V2 Waterproof Sensored Crawler Motor (2200kV)","description":"Holmes Hobbies Puller Pro Stubby V2 Waterproof Sensored Crawler Motor (2200kV)","brand":"Amain","offers":[{"title":"Default Title","offer_id":42298728743075,"sku":"HHB120100052","price":159.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/hhb120100052.jpg?v=1646765844"},{"product_id":"castle-creations-slate-1406-sensored-4-pole-brushless-crawler-motor-2280kv","title":"Castle Creations \"Slate\" 1406 Sensored 4-Pole Brushless Crawler Motor (2280kV)","description":"\u003cp data-mce-fragment=\"1\"\u003eThe Castle \"Slate\" 1406 Sensored 4-Pole Brushless Crawler Motors are ROCK READY! With super smooth startup and low RPM control, Castle has you covered if you are looking for the ultimate motor for the trails or Ultra 4 track days.\u003c\/p\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInput Voltage Range:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 2S-4S LiPo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKv:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e2280\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMax. RPM:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 100,000\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCan Length:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e49.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCan Diameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 36mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWeight (w\/wires):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 197 g \/ 6.9oz\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShaft Length:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e15mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShaft Diameter:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e1\/8\" (3.17mm) \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMounting Hole Specifications:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e M3 @ 25mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCooling Fan:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Optional - Coming Soon\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eConnectors:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eItems Needed for Operation:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Compatible Electronic Speed Control (ESC)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication Guidelines:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Ideal for 1:10 scale rock crawlers, trail rigs, touring cars, stadium trucks and buggies on 2S-4S with appropriate gearing.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRecommended ESC(s):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Mamba Max Pro, Mamba X, Mamba Micro X\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMax. Recommended Vehicle Weight:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRunning modes:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eNOTE:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to the document in the resources tab for running and maintaining motors in wet environments.\u003c\/span\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":42320478830755,"sku":"060-00069-00","price":124.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/cse060-00069-00.jpg?v=1647291155"},{"product_id":"maclan-mrr-v3m-competition-sensored-modified-brushless-motor-4-5t","title":"Maclan MRR V3m Competition Sensored Modified Brushless Motor (4.5T)","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMaclan MRR V3m Competition Sensored Modified Brushless Motor. Based on the V2 platform these updated motors are ROAR approved and performance driven. Improvements in this generation are significant and will make a noticeable performance gain over previous versions.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE:\u003c\/strong\u003e This motor should not be paired with the Reedy Blackbox 510R 2S ESC (ASC27004, ASC27005). These ESCs deliver 3.3V from the sensor port, and Maclan V3m motors require a minimum of 4.8V. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngineered \u0026amp; Developed right here in the U.S.A.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpdated 1-piece precision machined motor can design that eliminates the need for long motor can screws. Redesign uses a total of 5 short screws. It saves weight and no more optional screws required.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved stator shape that meets the latest ROAR regulations for the highest legal performance.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRealigned sensor positions for more accurate reading.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePremium Ultra Smooth Rotor is now standard by default. You get best performance right out of the box. Available in 3.5, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.5, 9.5 and 10.5 Turns.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eTurn:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e4.5\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShort Stack:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eNo\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCase Length:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e51.20mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eCase Diameter:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e36.00mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft Extension:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e14.00mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShaft Size:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e3.17mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eWeight:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e155g±3g\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScrews Size (end cap):\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e2.5x6mm (1.5mm Hex)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eScrew Size (motor can):\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e2x6mm (0.05\" Hex)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eFront Bearing Size: ID:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e3.175mm OD: 9.525mm H: 3.9675mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRear Bearing Size: ID:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e3.175mm OD: 7.9375mm H: 3.5712mm\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePoles:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e2-Pole\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDefault Rotor:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e12.20mm Ultra Smooth Rotor (Red)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eROAR Approved:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eYes\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eLimited Factory Warranty:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e120-Day\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":42322756337827,"sku":"MCL1055","price":139.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/mcl1055.jpg?v=1647371605"},{"product_id":"skyrc-sk-400003-56-ares-v2-1-spec-brushless-motor-6-5t","title":"SkyRC SK-400003-56 Ares V2.1 Spec Brushless Motor 6.5T","description":"\u003cspan data-mce-fragment=\"1\"\u003eSkyRC SK-400003-56 Ares V2.1 Spec Brushless Motor 6.5T\u003c\/span\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":42322786025635,"sku":"SK-400003-56","price":99.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/SK-400003-56-2T.jpg?v=1647373490"},{"product_id":"skyrc-ares-pro-v2-1-spec-13-5t-motor-3050kv","title":"SkyRC Ares Pro V2.1 Spec 13.5T Motor (3050KV)","description":"\u003cspan data-mce-fragment=\"1\"\u003eSkyRC Ares Pro V2.1 Spec 13.5T Motor (3050KV)\u003c\/span\u003e","brand":"SkyRC","offers":[{"title":"Default Title","offer_id":42322791268515,"sku":"SK-400003-58","price":99.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/SK-400003-58-2T.jpg?v=1647373691"},{"product_id":"hobbywing-xerun-4268sd-g3-1-8-scale-sensored-brushless-motor-2400kv","title":"Hobbywing Xerun 4268SD G3 1\/8 Scale Sensored Brushless Motor (2400kV)","description":"\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Hobbywing Xerun 4268SD G3 1\/8 Scale Sensored Brushless Motor is a great option for any competitive racer. These G3 motors use an updated \"error-free\" Hall sensor. This isolates interference allowing the motor to run at a constant peak performance. Furthering performance, premium materials are used giving the user great consistency and durability. Package includes one brushless motor.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2400Kv recommended for 1\/8 on road\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTurbo Timing Technology\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFull Sensored mode (when paired with XR8 ESC)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdjustable Timing (Bi-Directional) 20-40 degrees\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAdvanced Hall Sensor System\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e4-pole-8-magnet \"Staggered Pole\" rotor - HOBBYWING Patented design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGuarantees users the effective heat dissipation and dust prevention\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe use of double insulated windings (240°C R-rated), NMB bearings from Japan, and the high-intensity adhesive (340°C) guarantees users the outstanding performance and super durability\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eKv:\u003c\/strong\u003e 2400Kv\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePole:\u003c\/strong\u003e 4\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eLiPo:\u003c\/strong\u003e 2S-4S\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNo Load Current:\u003c\/strong\u003e 4.3A\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShaft Diameter:\u003c\/strong\u003e 5mm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSize (Diameter x Length):\u003c\/strong\u003e 42x68mm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWeight:\u003c\/strong\u003e 285g\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eApplication:\u003c\/strong\u003e 1\/8 On Road\u003c\/span\u003e\u003c\/div\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":42322848579747,"sku":"HW30401910","price":219.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/hwa30401910.jpg?v=1647375978"},{"product_id":"r1wurks-r1-7-0t-v16-motor-020152","title":"R1wurks R1 7.0T V16 Motor 020152","description":"\u003ch4 data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eR1 WURKS 7.0T MOTOR\u003c\/strong\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbig data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eV16\u003c\/em\u003e\u003c\/strong\u003e\u003c\/big\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eITEM# 020152\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e***Note: If you are ordering outside of the U.S. or Canada we recommend purchasing our motors through your local hobby store.*** \u003c\/b\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eROTOR: NOW COMES WITH 12.0MM ROTOR FOR THE BEST FEEL FOR MODIFIED RACNG\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eROAR APPROVAL PENDING\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAPPLICATION:\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eOFFROAD BUGGY, TRUCK, 4WD \u0026amp; SHORT COURSE TRUCK\u003cbr data-mce-fragment=\"1\"\u003eTC BLINKY (OUTDOOR \u0026amp; INDOOR)\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e1\/12 1S BLINKY\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eOVAL 1S BLINKY\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eOVAL 1S OPEN (BOOSTED)\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTECHNOLOGY:\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003ePROPRIETARY R1 STATOR LAMINATE MATERIAL \u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eR1 V16 STATORS ARE DESIGNED USING COMPUTER SIMULATION TECHNOLOGY\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eEPOXY BONDED END WIND\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eULTRA LOW RESISTANCE COLLECTOR RING\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003eIMPROVED RESISTANCE COMPARED TO V15\u003cbr data-mce-fragment=\"1\"\u003eIMPROVED PUNCH \u0026amp; TOP END\u003c\/p\u003e","brand":"R1 Wurks","offers":[{"title":"Default Title","offer_id":42338150023331,"sku":"020152","price":134.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/R1wurks7.0T.jpg?v=1651684531"},{"product_id":"reedy-sonic-540-m3-modified-1-2s-sensored-brushless-motor-7-5t","title":"Reedy Sonic 540-M3 Modified 1-2S Sensored Brushless Motor, 7.5T","description":"\u003cdiv class=\"mx-auto mb-1\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"featureListDiv\" class=\"wrapDiv\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"featureListDiv\" class=\"wrapDiv\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuilt to ROAR\/EFRA\/IFMAR specifications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC-machined lightweight can\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAluminum end cap\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLightweight design\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow-resistance, silver-plated solder tabs\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized air cooling\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDual precision stainless steel ball bearings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBalanced rotor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh-strength magnet\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable timing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompletely rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"consumerWebCopy\" data-mce-fragment=\"1\"\u003eOverview\u003c\/h3\u003e\n\u003cdiv id=\"consumerWebCopyDiv\" class=\"wrapDiv\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e3-piece CNC machined can reduces weight while improving airflow, component fit, and bearing alignment. Heavy-duty silver-plated solder tabs are not only thicker to reduce resistance, but are also cupped to aid soldering. All-new stator design, pure copper magnet wire, and low-resistance collector rings.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTo fine-tune for specific applications and tracks, a variety of optional rotors are available. Larger precision stainless steel ball bearings have been fitted to accommodate high RPM loads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 id=\"consumerWebCopy\" data-mce-fragment=\"1\"\u003eOverview\u003c\/h3\u003e\n\u003cdiv id=\"consumerWebCopyDiv\" class=\"wrapDiv\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eInternally, the 540-M4 is very similar to that of the 540-M3 that it replaces. The inner bearing has been moved so that it is now part of the can instead of the sensor assembly, which more precisely aligns the rotor within the magnetic field while reducing noise and vibration.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eExternally, the motor has been shortened, for a more centralized weight distribution within the chassis. The reduced length, combined with improvements to the can design, results in a 5-10g reduction in weight.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA variety of optional rotors are available to fine-tune for specific applications and tracks.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"horizon Hobby","offers":[{"title":"Default Title","offer_id":42382107771043,"sku":"ASC260","price":99.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ASC260.jpg?v=1649082600"},{"product_id":"maclan-drk-sensored-4-pole-brushless-no-prep-drag-motor-6600kv","title":"Maclan DRK Sensored 4-Pole Brushless No Prep Drag Motor (6600kV)","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe Maclan DRK Sensored 4-Pole Brushless No Prep Drag Motor brings huge power to the drag racing world. This 4-pole motor is extremely powerful yet still smooth and controllable especially when paired with the DRK ESC. Developed to pair with the proprietary DRK 4-Pole Unlock firmware you can experience unmatched throttle control not usual in super high performance motors like this one. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e550 class with 36mm diameter and 63mm length\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6600KV with adjustable motor timing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStainless steel wrap rotor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e5mm motor output shaft (optional 3.17mm motor output shaft rotor)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOpen end cap for easy access to rear bearing for maintenance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax RPM 75000\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNOTE\u003c\/strong\u003e: RC drag race application is extremely abusive on all electronics. This motor produces a lot of power that can shorten the lifespan of drivetrain, ESC, and battery. Incorrect setup can result in irreversible permanent damages to the equipment or personal injuries. Please read the user manual carefully before use.\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnder gearing\/over gearing will impose excessive amperage and will damage ESC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA final drive ratio (FDR) between 7.8 and 8.2 is recommended\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDo not exceed 75,000 RPM. Rotor failure is possible\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRunning a 4-Pole motor in 2-Pole mode may damage ESC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":42973779755171,"sku":"MCL1072","price":209.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/mcl1072.jpg?v=1665509022"},{"product_id":"lrp-x22-competition-sensored-modified-brushless-motor-9-5t","title":"LRP X22 Competition Sensored Modified Brushless Motor (9.5T)","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe LRP X22 9.5 Turn Modified Brushless Motor was developed for competition at the highest level, and is LRP's solution for maximum power with the highest efficiency. Based on the three time IFMAR World Championship winning Vector X20 motors, the X22 further improves upon that design with features that include a rotor shaft with longer mounting surface, optimized timing range for more precise timing settings, low profile bearings, updated air vent design, and even lower resistance. Built to comply with IFMAR, EFRA, ROAR, FEMCA, JMRCA, BRCA and DMC specification, the X22 is poised to continue its predecessor's heritage of being one of the most powerful motors on the market!\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2017 Spec Duel-axis balanced sintered rotor shaft with longer mounting surface.  \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecisely adjusted and optimized timing range from 14.5° to 34.5°\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDuel precision 4x10x4 ABEC-5 bearings for precise running and longevity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra lightweight, precision machined 7075-T6 Aluminum housing with maximized cut-outs and additional openings.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpdated multi-layer PCB specification for even lower resistance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWaterproof preciSensor™ System: Fully waterproof precise sensor positioning for best power, throttle feel and efficiency. Fully adjustable and replaceable\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHighest quality \"dark shine black\" anodizing with X22 engraving\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved power delivery and efficiency\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWorld‘s winning motor technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eType:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Brushless sensored\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePole count:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 2\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eShaft Diameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 3.17mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMotor Diameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 35.9mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMotor Length:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 50.8mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWeight:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 159-164g\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRotor Diameter:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 12.5mm\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eVoltage input:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e 1S-2S Lipo\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWinding:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Star (Multistrand Copper Winding)\u003c\/span\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":43044579999907,"sku":"LRP520012","price":152.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/lrp520012.webp?v=1667506054"},{"product_id":"hobbywing-30401117-xerun-v10-g3-6t-sensored-brushless-motor-5500kv","title":"Hobbywing 30401117 XeRun V10 G3 6T Sensored Brushless Motor (5500kv)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan id=\"item_description\" data-mce-fragment=\"1\"\u003eXeRun V10 G3 6T Sensored Brushless Motor (5500kv)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDesigned for Extremely High-Level Racing. The KV \u0026amp; torque have been increased by 16% and 4% respectively, compared to the V10 G2 Stock motor.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eApplication: 1\/10 Scale 4WD Off-Road Racing\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLightweigt\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe built-in high precision Hall sensor is combined w\/ balanced rotor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe mechanical timing can be adjusted.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe motor case is designed to be easily dismantled for maintenance purposes.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eHeat resistant wire, rotor. (200 Celsius)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCompliant w\/: IFMAR, ROAR, EFRA, BRCA rules, and certified by RoHS, CE, FCC.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e2 POLE Super High-Efficiency brushless motor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDiameter: 35.9mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLength: 51.2mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShaft Length: 13.3mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eShaft Diameter: 3.17mm\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":43169985986723,"sku":"HW30401117","price":139.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/G3-1.jpg?v=1673054114"},{"product_id":"furitek-scx24-stellar-transmission-komodo-brushless-motor","title":"Furitek SCX24 Stellar Transmission \u0026 Komodo Brushless Motor","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe Furitek SCX24 Stellar Transmission and Komodo Brushless Motor is a great option for increasing the power of your Axial SCX24. This set features a pre-built CNC-machined aluminum transmission and motor mount with brushless motor. When paired with a Furitek Brushless ESC (not included), this set allows for extreme low end torque and control. Package includes one pre-built transmission and one Komodo brushless motor. \u003c\/span\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":43196293021859,"sku":"FTK-FUR-2079","price":149.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/ftk-2079.jpg?v=1674154542"},{"product_id":"hobbywing-xerun-3652-g2-sensored-motor","title":"Hobbywing XeRun 3652 G2 6100Kv sensored motor","description":"\u003cdiv class=\"willtab-container\"\u003e\n\u003cdiv class=\"willtab-content\"\u003e\n\u003cdiv class=\"tab-0\"\u003e\n\u003cul\u003e\n\u003cli\u003eROAR approved Innovative 4-pole-8-magnet \"staggered pole\" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.\u003c\/li\u003e\n\u003cli\u003eBuilt-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with an HW sensored ESC (i.e. XR8 SCT\/Plus), the motor can work in the “sensored” mode at all times with great output linearity after the identification. The Turbo timing is allowed to be activated for higher output.\u003c\/li\u003e\n\u003cli\u003eMagnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in the “sensored” mode.\u003c\/li\u003e\n\u003cli\u003eWith the mechanical timing adjustable from 20 degrees to 40 degrees, users are able to have different output power.\u003c\/li\u003e\n\u003cli\u003eTurbine design implemented by the rotor accelerates the internal air circulation and reduces heat.\u003c\/li\u003e\n\u003cli\u003eRebuildable design (partially rebuild-able) and a screw-less motor case for easy routine maintenance effectively prolong the motor life and raise the motor efficiency.\u003c\/li\u003e\n\u003cli\u003eCNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.\u003c\/li\u003e\n\u003cli\u003eNew-style “U” solder tabs at the bottom of the motor for easy soldering and wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-1\"\u003e\n\u003ch3\u003eXerun 3652 sensored brushless motor \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMotor Dimension: Φ=36mm (1.417in)  L=52.5mm (2.067in)\u003c\/li\u003e\n\u003cli\u003eBearing: Front: NMB R-1350zz(5*13*4mm) Rear: 5*11*5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eP\/N\u003c\/td\u003e\n\u003ctd\u003e30401056\u003c\/td\u003e\n\u003ctd\u003e30401058\u003c\/td\u003e\n\u003ctd\u003e30401059\u003c\/td\u003e\n\u003ctd\u003e30401060\u003c\/td\u003e\n\u003ctd\u003e30401061\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e KV (no Load)\u003c\/td\u003e\n\u003ctd\u003e3100 Kv\u003c\/td\u003e\n\u003ctd\u003e3800 Kv\u003c\/td\u003e\n\u003ctd\u003e4300 Kv\u003c\/td\u003e\n\u003ctd\u003e5100kv\u003c\/td\u003e\n\u003ctd\u003e6100kv\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePOLE\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiPo (V)\u003c\/td\u003e\n\u003ctd\u003e2-3S\u003c\/td\u003e\n\u003ctd\u003e2-3S\u003c\/td\u003e\n\u003ctd\u003e2S\u003c\/td\u003e\n\u003ctd\u003e2S\u003c\/td\u003e\n\u003ctd\u003e2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Load Current (A)\u003c\/td\u003e\n\u003ctd\u003e2.9\u003c\/td\u003e\n\u003ctd\u003e3.9\u003c\/td\u003e\n\u003ctd\u003e4.2\u003c\/td\u003e\n\u003ctd\u003e4.7\u003c\/td\u003e\n\u003ctd\u003e5.9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResistance\u003c\/td\u003e\n\u003ctd\u003e0.0087Ω\u003c\/td\u003e\n\u003ctd\u003e0.0059Ω\u003c\/td\u003e\n\u003ctd\u003e0.0052Ω\u003c\/td\u003e\n\u003ctd\u003e0.0035Ω\u003c\/td\u003e\n\u003ctd\u003e0.0029Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter (mm)\u003c\/td\u003e\n\u003ctd\u003e36mm\u003c\/td\u003e\n\u003ctd\u003e36mm\u003c\/td\u003e\n\u003ctd\u003e36mm\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e36mm\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e36mm\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength w\/o Shaft (mm)\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e56\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e56\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e56\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft dia. (mm)\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e5\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e5\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShaft length (mm)\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e15\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e15\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight \u003c\/td\u003e\n\u003ctd\u003e192g\u003c\/td\u003e\n\u003ctd\u003e192g\u003c\/td\u003e\n\u003ctd\u003e187g\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e192g\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cspan\u003e186g\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjut. timing (degree)\u003c\/td\u003e\n\u003ctd\u003e20-40\u003c\/td\u003e\n\u003ctd\u003e20-40\u003c\/td\u003e\n\u003ctd\u003e20-40\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20-40\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e20-40\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCombo\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e IMPORTANT NOTE:  \u003cbr\u003e► The “Maximum Output Power” is measured with 7.4V input voltage and ESC at ZERO timing. This parameter is neither the “maximum input power” nor the “rating power”, it is calculated by “RPM x Torque \/ 9550”. Because each factory runs a different testing platform, the above data may vary. ► Max Amp is the “Current at Max Output Power” It is a guide used for selecting the suitable power system (ESC, Motor, Gear ratio, etc.) If the actual input current of the power system is bigger than the peak parameter stated in the above table, this means that the power system settings\/configuration is over its peak (or in other words, “overloaded”.)  ► The “KV” is measured without any load on the motor and ESC at ZERO timing. Do NOT run the motor without load for long periods of time (1 minute), otherwise the motor may overheat.   \u003c\/p\u003e\n\u003cdiv class=\"tab-2\"\u003e\n\u003cul\u003e\n\u003cli\u003e1\/10 2WD\/4WD SCT Pro Race\u003c\/li\u003e\n\u003cli\u003e1\/10 Truggy\/ Monster Pro Race\u003c\/li\u003e\n\u003cli\u003eBest match with \u003cstrong\u003eXR8 SCT Pro ESC\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"tab-2\"\u003e\n\u003cp\u003eManufacturer limited warranty Information\u003cbr\u003eClick\u003ca href=\"http:\/\/www.falconsekido.com\/pages\/rma\" title=\"hobbywing manufacture limited warranty information\"\u003e here\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNever leave this product unsupervised when it is powered on.\u003c\/li\u003e\n\u003cli\u003eEnsure all wires and connections are well insulated before connecting the motor to related devices, as short circuit will damage your motor.\u003c\/li\u003e\n\u003cli\u003ePlease strictly follow the A-A, B-B and C-C wiring order when connecting an ESC to the motor. • Never allow this product to come in contact with water, oil, fuel or other electroconductive liquids. If this happens, stop the use of your product immediately and let it dry carefully.\u003c\/li\u003e\n\u003cli\u003eRead through the manuals of all power devices and chassis and ensure the power configuration is rational before using this unit.\u003c\/li\u003e\n\u003cli\u003eNever hit full throttle before installing the pinion, as high-speed rotation may cause damage to the motor in circumstances of no load.\u003c\/li\u003e\n\u003cli\u003eEnsure all devices are well connected, in order to prevent poor connection that may cause your vehicle to lose control or other unpredictable issues such as damage to the device.\u003c\/li\u003e\n\u003cli\u003eStop using the motor when its shell temperature exceeds 100℃\/212℉; otherwise, the rotor may be demagnetized and cause irreversible damage to your motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch5\u003e \u003c\/h5\u003e\n\u003ch6\u003eWhat in box?\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e1x Xerun 3652SD motor\u003c\/li\u003e\n\u003cli\u003e2x sensor wires (80mm \/ 120mm)\u003c\/li\u003e\n\u003cli\u003e1x pinion gear\u003c\/li\u003e\n\u003cli\u003e1 set of factory premium grade wires\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":43315314131107,"sku":"HW30401061","price":139.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/3652SD-G2a_2048x_e3903a7a-f56f-4460-9a57-e49f0be120c2.webp?v=1679596448"},{"product_id":"hobbywing-ezrun-max-motor-sl-5687-1100kvblack-v1","title":"Hobbywing EZRUN 5687SL 4-Pole 1\/5 Scale Sensorless Brushless Motor (1100kV)","description":"\u003cem\u003e\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/em\u003e\n\u003cdiv data-cel-widget=\"productOverview_feature_div\" data-csa-c-id=\"dcka0o-ewhcwa-25eo04-3goih1\" data-csa-c-is-in-initial-active-row=\"false\" data-csa-c-asin=\"B07QR7VHCN\" data-csa-c-slot-id=\"productOverview_feature_div\" data-csa-c-content-id=\"productOverview\" data-csa-c-type=\"widget\" data-feature-name=\"productOverview\" class=\"celwidget\" id=\"productOverview_feature_div\"\u003e\n\u003cdiv class=\"a-expander-collapsed-height a-row a-expander-container a-spacing-none a-expander-partial-collapse-container\" data-a-expander-collapsed-height=\"210\" data-a-expander-name=\"product_overview\" id=\"poExpander\"\u003e\n\u003cdiv class=\"a-expander-content a-expander-partial-collapse-content\" aria-expanded=\"false\"\u003e\n\u003cdiv class=\"a-section a-spacing-small a-spacing-top-small\"\u003e\n\u003cp\u003eHobbywing EZRUN 5687SL 4-Pole 1\/5 Scale Sensorless Brushless Motor.  \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5687SL-1100KV\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003ePole:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eKV (No-load):\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1100KV\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eResistance:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e0.0041 Ω\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCurrent (No-load):\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e4.1 A\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMax Output Power:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e5800 W\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eCurrent at the point of M.O.P:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e200 A\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMotor Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e56mm \u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eMotor Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e87mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e8.0mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eShaft Length:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e31.0mm\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eLiPo Cells:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3-8\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e916g (32.21oz)\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eApplicable:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1\/5th RC Vehicles Truck\/Dragster\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003eSuitable ESC:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eEzrun MAX5 or MAX6 ESC\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cem\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/em\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":43356613902499,"sku":"HW30402550","price":259.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/hwa30402550.jpg?v=1681499382"},{"product_id":"holmes-hobbies-puller-pro-r-540-l-v2-waterproof-sensored-crawler-motor-4100kv","title":"Holmes Hobbies Puller Pro R 540-L V2 Waterproof Sensored Crawler Motor (4100kV)","description":"\u003cdiv\u003e\u003cspan\u003eThe Holmes Hobbies Puller Pro R 540-L V2 Waterproof Sensored Crawler Motor is a rock race honed variation with higher quality materials for less heat, more torque, and less brake fade. It retains great low speed control and throttle feel, giving you an edge whether in the rocks or on the straights. An absolute beast on 3s!\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eDesigned for dominating 1\/10th scale U4, rock racing, endurance, G6, and trail adventure. Installs into Axial Yeti \u0026amp; Bomber, Losi Rock Rey, Traxxas TRX-4, and similar vehicles accepting 550 size motors. Recommended battery 2s or 3s lipo, 3800mah 35c or greater. Recommended ESC 1\/10th or 1\/8th scale suitable for 4x4 vehicles. If you get your motor wet, you must clean, dry, and relube bearings to avoid damage.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003eWarning! Do not extend screws into motor plate more than 3.5mm or damage to windings may occur. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eFour pole 17.5mm diameter x 32mm length rotor\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTwelve slot stator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e180C resin impregnated copper windings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e200C rated high strength neodymium magnets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOversized bearings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSensored\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWaterproof sensor board\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSensor wire included\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e 1 year warranty from date of purchase. Does not include damage from overheating, rusting, or improper installation. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eType:\u003c\/strong\u003e \"550\" size motor\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eMount Pattern:\u003c\/strong\u003e 25mm \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eMounting Hardware:\u003c\/strong\u003e M3 screws\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eShaft Diameter:\u003c\/strong\u003e 5mm \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eCan Size:\u003c\/strong\u003e 36mm diameter x 60.5mm length\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 236.5g\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cstrong\u003eRPM:\u003c\/strong\u003e 60,000 rpm max\u003c\/span\u003e\u003c\/div\u003e","brand":"Amain","offers":[{"title":"Default Title","offer_id":43365270945955,"sku":"120100058","price":229.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/products\/hhb120100058.jpg?v=1682019243"},{"product_id":"traxxas-velineon-3500-brushless-motor-10t-3500kv","title":"Traxxas Velineon 3500 Brushless Motor (10T\/3500kV)","description":"\u003cp data-mce-fragment=\"1\"\u003eThis is the Traxxas Velineon 3500 Brushless Motor. The Velineon 3500 Brushless Motor features a precision balanced rotor, high-speed ball bearings, and ultra high-temperature Neodymium magnets for a great blend of power and long-life. The Velineon 3500 delivers consistent, high-power output, run after run.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUltra high-temperature sintered Neodymium magnets provide\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003emassive torque and linear power\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOptimized for power and efficiency in 1\/10th scale vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConsistent, high-power output, run after run\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow-maintenance, unique Traxxas design\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEfficient, high-speed ball bearings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLow maintenance design\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrecision-balanced rotor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProtective end cap\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10-Turn, 3500Kv\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRebuildable\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHex hardware\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBrilliant blue-anodizing finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSilicon steel laminations\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDelivers more power than comparable brushed motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNote:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eThe motor is not compatible with the older TRA3355\u003cstrong data-mce-fragment=\"1\"\u003eX\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eESC. It must be used with the newer TRA3355\u003cstrong data-mce-fragment=\"1\"\u003eR\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eESC.\u003c\/p\u003e","brand":"Hi-Performance","offers":[{"title":"Default Title","offer_id":43477626781859,"sku":"TRA3351R","price":125.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/tra3351r.jpg?v=1689888162"},{"product_id":"hobbywing-justock-3650sd-g2-1-brushless-motor","title":"Hobbywing 10.5T JUSTOCK 3650SD G2.1 Brushless Motor","description":"\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompliant with ROAR and IFMAR rules \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantee outstanding performance and super durability.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantee the user a smooth and linear power on demand.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe silicone O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eThe detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfectly matched with the XR10-Justock ESC for all zero timing spec racing and also compatible with other Hobbywing Electronic Speed Controllers including other brands.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBattery: 2S-3S LiPo\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 POLE\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\/10 ,1\/12 On-Road (Truggy \/ Drifting Car \/ F1 \/ Monster) \u0026amp; Off-Road (Buggy \/ 2WD SC Truck \/Truck) STOCK \/ SPORT Race (choose the motor base on competition rules.) Free\/casual run for\u003cbr data-mce-fragment=\"1\"\u003enew beginners.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":43485284139171,"sku":"HW30408009","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0516\/6206\/1731\/files\/Justock10.5TG2.1_2048x_57f9b14b-56c7-4f30-9d57-caa4dd646e00.jpg?v=1690476206"}],"url":"https:\/\/www.xtremerc.ca\/collections\/brushless-motors.oembed?page=2","provider":"Xtreme RC \u0026 Raceways","version":"1.0","type":"link"}